EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Organosolv Lignin-Based Biopolyols Obtained via Oxyalkylation with Propylene Carbonate as Precursors of Rigid Polyurethane Foams

Jacek Lubczak, Marzena Szpiłyk

Polymers · 30.06.2026 · 18 (13) · 1633

DOI: 10.3390/polym18131633 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.06.2026. Verfasst von Jacek Lubczak und 1 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Chemistry, Rzeszów University of Technology, Al. Powstańców Warszawy 6, 35 959 Rzeszów, Poland. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Higher Education.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The study presents the results of research on the preparation of biopolyols based on organosolv lignin and their application in the synthesis of rigid polyurethane foams. The research was conducted in order to develop a sustainable alternative to the previously used ethylene carbonate in lignin oxyalkylation processes. The main objective was to replace the previously used ethylene carbonate with propylene carbonate in a stoichiometrically equivalent molar amount in order to reduce polyol viscosity and improve the performance properties of the resulting foams. The syntheses were carried out without the need for isolation and purification of intermediate products. Polyols analogous to those described previously were obtained and subsequently used for the preparation of rigid polyurethane foams employing polymeric diphenylmethane diisocyanate. The properties of the obtained foams were investigated and compared with those of foams prepared from ethylene carbonate-based polyols. The results demonstrated that the use of propylene carbonate leads to the formation of lower-viscosity polyols, facilitating homogenization of the reaction systems and enabling the production of foams with advantageous performance characteristics, generally superior to those of foams based on ethylene carbonate. The obtained materials constitute a promising alternative to conventional polyurethane foams derived from petrochemical raw materials.

Schlagwörter

Stichwörter der Autor:innen

glycerolglycidolorganosolv ligninpolyolspolyurethane foamspropertiespropylene carbonate

Autor:innen und Institutionen

  • Faculty of Chemistry, Rzeszów University of Technology, Al. Powstańców Warszawy 6, 35 959 Rzeszów, Poland.

Förderung

  • Ministry of Science and Higher Education

Zitieren

APA

Lubczak, J., & Szpiłyk, M. (2026). Organosolv Lignin-Based Biopolyols Obtained via Oxyalkylation with Propylene Carbonate as Precursors of Rigid Polyurethane Foams. Polymers, 18(13), 1633. https://doi.org/10.3390/polym18131633

Vancouver

Lubczak J, Szpiłyk M. Organosolv Lignin-Based Biopolyols Obtained via Oxyalkylation with Propylene Carbonate as Precursors of Rigid Polyurethane Foams. Polymers. 2026;18(13):1633. doi:10.3390/polym18131633

BibTeX
@article{Lubczak2026,
  author = {Lubczak, Jacek and Szpiłyk, Marzena},
  title = {Organosolv Lignin-Based Biopolyols Obtained via Oxyalkylation with Propylene Carbonate as Precursors of Rigid Polyurethane Foams},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {13},
  pages = {1633},
  doi = {10.3390/polym18131633}
}
Kostenlos starten →