The Silicone Rubber (SR) Composites: The Assessment of Changes in Hardness, Thermal Properties and Surface Quality Materials After Accelerated Aging Process
Polymers · 30.06.2026 · 18 (13) · 1631
DOI: 10.3390/polym18131631 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 30.06.2026. Verfasst von Ewa Miękoś und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Inorganic and Analytical Chemistry, Faculty of Chemistry, University of Lodz, Tamka 12, 91-403 Lodz, Poland. Die Arbeit nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of Lodz.
Abstract (Originalsprache)
In this paper, the accelerated aging process of a layer of polymer composites based on the silicone rubber modified by plant-based fillers and iron carbonyl was investigated. The color change, Shore’s hardness, thermal resistance, and surface quality of the composites after weathering were tested. The degradation behavior of the silicone rubber and its composites was characterized by TGA and FTIR techniques, as well as optical microscopy. It was found that the aging process increased the hardness of the silicone rubber composites by approx. 10% compared to pure silicone, and by a further 10% by weight in the case of composites containing plant-based fillers, such as turmeric and goldenrod. The promising results indicate that a SR/CLP/Fe/AM composite modified with carbonyl iron and a surfactant acts as an effective stabilizer for the silicone rubber matrix. An increase in the maximum temperature of 40 °C was also recorded compared to the unmodified silicone rubber. The results showed that the surface color of the aged samples changed in terms of lightness and total color. It was found that silicone rubber composites containing plant-based fillers exhibit properties characteristic of age-resistant materials; in particular, the SR/CLP/Fe composites modified with carbonyl iron are more resistant to water and light during accelerated aging than unmodified silicone rubber, which ensures a longer service life.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Inorganic and Analytical Chemistry, Faculty of Chemistry, University of Lodz, Tamka 12, 91-403 Lodz, Poland.
- Department of Plastics Division, Institute of Materials Technology, Poznan University of Technology, Piotrowo 3, 61-136 Poznan, Poland.
- Department of Materials Technology and Chemistry, Faculty of Chemistry, University of Lodz, Pomorska 163, 90-236 Lodz, Poland.
- Department of Technology and Polymer Processing, Faculty of Mechanical Engineering, Lublin University of Technology, Nadbystrzycka 36, 20-618 Lublin, Poland.
- Department of Biology of Bacteria, Faculty of Biology and Environmental Protection, University of Lodz, Banacha 12/16, 90-237 Lodz, Poland.
ORCID-Profile: Ewa Miękoś, Dorota Czarnecka-Komorowska, Michał Cichomski, Tomasz Klepka, Dominika Drzewiecka, Dariusz Sroczyński, Anna Fenyk
Förderung
- University of Lodz
Zitieren
APA
Miękoś, E., Zieliński, M., Czarnecka-Komorowska, D., Cichomski, M., Klepka, T., Drzewiecka, D., Sroczyński, D., & Fenyk, A. (2026). The Silicone Rubber (SR) Composites: The Assessment of Changes in Hardness, Thermal Properties and Surface Quality Materials After Accelerated Aging Process. Polymers, 18(13), 1631. https://doi.org/10.3390/polym18131631
Vancouver
Miękoś E, Zieliński M, Czarnecka-Komorowska D, Cichomski M, Klepka T, Drzewiecka D, et al. The Silicone Rubber (SR) Composites: The Assessment of Changes in Hardness, Thermal Properties and Surface Quality Materials After Accelerated Aging Process. Polymers. 2026;18(13):1631. doi:10.3390/polym18131631
BibTeX
@article{Miko2026,
author = {Miękoś, Ewa and Zieliński, Marek and Czarnecka-Komorowska, Dorota and Cichomski, Michał and Klepka, Tomasz and Drzewiecka, Dominika and Sroczyński, Dariusz and Fenyk, Anna},
title = {The Silicone Rubber (SR) Composites: The Assessment of Changes in Hardness, Thermal Properties and Surface Quality Materials After Accelerated Aging Process},
journal = {Polymers},
year = {2026},
volume = {18},
number = {13},
pages = {1631},
doi = {10.3390/polym18131631}
}
EUVIMED