EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Sterilization Methods on the Physicochemical Properties of Silk Fibroin Hydrogels

Carlos A Busatto iD, Emanuela Callone iD, Marzia Di Chio, Sandra Dirè iD, Chavee Laomeephol iD, Ilaria Decimo iD, Adriano Fasolo iD, Stefano Ferrari iD, Erika Bonacci iD, Emilio Pedrotti iD, Antonella Motta iD

Polymers · 30.06.2026 · 18 (13) · 1625

DOI: 10.3390/polym18131625 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.06.2026. Verfasst von Carlos A Busatto und 10 weiteren Autor:innen. Beteiligte Einrichtung: BIOtech-Center for Biomedical Technologies, Department of Industrial Engineering, University of Trento, 38183 Trento, Italy. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Universities and Research, PRIN Project, European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the impact of clinically relevant sterilization methods, such as ethylene oxide (EtO), gamma (γ) irradiation, autoclaving, and hydrogen peroxide gas plasma, on the physical, structural, and functional properties of methacrylated silk fibroin hydrogels obtained by photo- and enzymatic crosslinking. EtO, γ irradiation, and hydrogen peroxide gas plasma were applied as terminal sterilization methods to the fabricated hydrogels, whereas autoclaving was performed on the SilMA precursor solution prior to hydrogel formation. Silk fibroin hydrogels at 5 and 7 wt.% concentrations were evaluated for transparency, rheological behavior, water content, secondary structure, chemical composition, thermal stability, microbial growth, and morphology after sterilization and during storage. EtO sterilization effectively maintained high optical transparency (>98%) but compromised the mechanical properties of the hydrogels. In contrast, γ-irradiation and autoclaving promoted greater β-sheet formation, resulting in increased mechanical stiffness and thermal stability but reduced transparency after autoclaving. Plasma sterilization proved unsuitable, as incomplete cycles related to the high-water content of hydrogels. Overall, the results delineate the influence of different sterilization strategies and identify approaches that best preserve or enhance the performance of silk hydrogels, supporting their clinical translation in tissue engineering.

Schlagwörter

Stichwörter der Autor:innen

hydrogelsmethacrylated silk fibroinphysicochemical propertiessterilizationtissue engineering

Autor:innen und Institutionen

  • BIOtech-Center for Biomedical Technologies, Department of Industrial Engineering, University of Trento, 38183 Trento, Italy.
  • Instituto de Desarrollo Tecnológico para la Industria Química (INTEC), Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), Universidad Nacional del Litoral (UNL), Santa Fe 3000, Argentina.
  • "Klaus Müller" Magnetic Resonance Laboratory, Department of Industrial Engineering, University of Trento, 38123 Trento, Italy.
  • Ophthalmic Unit, Department of Neurosciences, Biomedicine and Movement Sciences, University of Verona, 37134 Verona, Italy.
  • Department of Biochemistry and Microbiology, Faculty of Pharmaceutical Sciences, Chulalongkorn University, Bangkok 10330, Thailand.
  • Fondazione Banca degli Occhi del Veneto, 30173 Venice, Italy.

ORCID-Profile: Carlos A Busatto, Emanuela Callone, Sandra Dirè, Chavee Laomeephol, Ilaria Decimo, Adriano Fasolo, Stefano Ferrari, Erika Bonacci, Emilio Pedrotti, Antonella Motta

Förderung

  • Ministry of Universities and Research
  • PRIN Project
  • European Union

Zitieren

APA

Busatto, C. A., Callone, E., Di Chio, M., Dirè, S., Laomeephol, C., Decimo, I., Fasolo, A., Ferrari, S., Bonacci, E., Pedrotti, E., & Motta, A. (2026). Effect of Sterilization Methods on the Physicochemical Properties of Silk Fibroin Hydrogels. Polymers, 18(13), 1625. https://doi.org/10.3390/polym18131625

Vancouver

Busatto CA, Callone E, Di Chio M, Dirè S, Laomeephol C, Decimo I, et al. Effect of Sterilization Methods on the Physicochemical Properties of Silk Fibroin Hydrogels. Polymers. 2026;18(13):1625. doi:10.3390/polym18131625

BibTeX
@article{Busatto2026,
  author = {Busatto, Carlos A and Callone, Emanuela and Di Chio, Marzia and Dirè, Sandra and Laomeephol, Chavee and Decimo, Ilaria and Fasolo, Adriano and Ferrari, Stefano and Bonacci, Erika and Pedrotti, Emilio and Motta, Antonella},
  title = {Effect of Sterilization Methods on the Physicochemical Properties of Silk Fibroin Hydrogels},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {13},
  pages = {1625},
  doi = {10.3390/polym18131625}
}
Kostenlos starten →