EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Constitutive Modeling of the Nonlinear Tensile Response of High-Strength Nanofiber Yarns Under Monotonic Loading

Qingqing Shao, Jingyu Hu, Qiyu Wei, Jiqiang Cao iD, Yuanshu Xiao, Xiang Liu, Bo Xing iD, Xiakeer Saitaer

Polymers · 26.06.2026 · 18 (13) · 1592

DOI: 10.3390/polym18131592 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.06.2026. Verfasst von Qingqing Shao und 7 weiteren Autor:innen. Beteiligte Einrichtung: Xinjiang Key Laboratory of Intelligent and Green Textile, College of Textiles & Clothing, Xinjiang University, Urumqi 830046, China. Die Arbeit nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Department of Science and Technology of Xinjiang Uygur Autonomous Region.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-strength nanofiber yarns exhibit pronounced nonlinear tensile responses arising from their hierarchical fibrous architecture, yet compact constitutive descriptions remain limited. Here, high-strength polyacrylonitrile nanofiber yarns were prepared by post-drawing as-spun yarns above the glass transition temperature, and their aligned, stacked morphology was confirmed by scanning electron microscopy. Monotonic tensile tests at different loading rates were used to quantify the rate-dependent stress–strain response. The tangent modulus derived from the tensile curve varied strongly with strain, confirming clear deviation from linear viscoelasticity. To capture this behavior, two effective models were established: a modified nonlinear three-element model and a structural four-element model incorporating a nonlinear elastic contribution. Closed-form stress–strain expressions were derived for constant strain-rate loading and fitted to experimental data using nonlinear regression. Both models reproduced the measured tensile curves with high accuracy over the investigated loading-rate range, with correlation coefficients close to unity and low fitting errors. The identified parameters were highly consistent between formulations, indicating functional equivalence for the present monotonic tensile dataset. These results provide a compact framework for characterizing and designing hierarchical polymer nanofiber yarns.

Schlagwörter

Stichwörter der Autor:innen

constitutive modelinghigh-strength nanofiber yarnsmonotonic loadingnonlinear tensile responseviscoelasticity

Autor:innen und Institutionen

  • Xinjiang Key Laboratory of Intelligent and Green Textile, College of Textiles & Clothing, Xinjiang University, Urumqi 830046, China.
  • Key Laboratory of Textile Science and Technology (Ministry of Education), College of Textiles, Donghua University, Shanghai 201620, China.

ORCID-Profile: Jiqiang Cao, Bo Xing

Förderung

  • Department of Science and Technology of Xinjiang Uygur Autonomous Region

Zitieren

APA

Shao, Q., Hu, J., Wei, Q., Cao, J., Xiao, Y., Liu, X., Xing, B., & Saitaer, X. (2026). Constitutive Modeling of the Nonlinear Tensile Response of High-Strength Nanofiber Yarns Under Monotonic Loading. Polymers, 18(13), 1592. https://doi.org/10.3390/polym18131592

Vancouver

Shao Q, Hu J, Wei Q, Cao J, Xiao Y, Liu X, et al. Constitutive Modeling of the Nonlinear Tensile Response of High-Strength Nanofiber Yarns Under Monotonic Loading. Polymers. 2026;18(13):1592. doi:10.3390/polym18131592

BibTeX
@article{Shao2026,
  author = {Shao, Qingqing and Hu, Jingyu and Wei, Qiyu and Cao, Jiqiang and Xiao, Yuanshu and Liu, Xiang and Xing, Bo and Saitaer, Xiakeer},
  title = {Constitutive Modeling of the Nonlinear Tensile Response of High-Strength Nanofiber Yarns Under Monotonic Loading},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {13},
  pages = {1592},
  doi = {10.3390/polym18131592}
}
Kostenlos starten →