Research on the Mechanical Durability Performance and Action Mechanism of Basalt Fiber-Reinforced Concrete for Ship Lock Wall
Polymers · 26.06.2026 · 18 (13) · 1587
DOI: 10.3390/polym18131587 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.06.2026. Verfasst von Benkun Lu und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Hydraulic and Ocean Engineering, Changsha University of Science & Technology, Changsha 410114, China. Die Arbeit nennt 85 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Program of Hunan Provincial Department of Transportation, National Natural Science Foundation of China, Key R&D plan project of Science and Technology Department of Hunan Province.
Abstract (Originalsprache)
To address early-age cracking in concrete walls of hydraulic structures such as ship locks, basalt fibers (BFs) were incorporated as a reinforcement strategy. The effects of varying BF dosages and lengths on the workability, mechanical strength, and crack resistance of concrete were systematically evaluated. Furthermore, the internal microstructure was examined using scanning electron microscopy (SEM), and the durability performance, including impermeability, freeze–thaw resistance, and abrasion resistance, was assessed. The results indicate that workability decreased with increasing fiber content and length. The highest mechanical performance among tested mixes was achieved with 0.1% BF of 9 mm length, increasing 7-day and 28-day compressive strength by 17.47% and 22.59%, respectively, compared to plain concrete. The greatest crack resistance was observed with 0.2% BF of 18 mm length, delaying cracking by 150% and reducing crack width by 85%. Durability tests showed that a 0.2%-18 mm BF mix reduced water permeability depth by 47.37% and a 0.3% BF content optimized abrasion resistance. Freeze–thaw cycles indicated that a 0.3% fiber content effectively maintained the relative dynamic elastic modulus. SEM analysis revealed that BFs act as micro-bridges within the matrix, optimizing pore structure, inhibiting micro-crack propagation, and enhancing concrete density. This study evaluates BF-reinforced concrete and provides a practical reference for improving crack resistance and long-term durability in ship lock structures.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Hydraulic and Ocean Engineering, Changsha University of Science & Technology, Changsha 410114, China.
- Hunan Provincial Department of Transportation, Changsha 410000, China.
- Key Laboratory of Water-Sediment Sciences and Water Disaster Prevention of Hunan Province, Changsha 410114, China.
- Hunan Provincial Water Transport Construction & Investment Group Co., Ltd., Changsha 410029, China.
- Hunan Provincial Communications Planning, Survey & Design Institute Co., Ltd., Changsha 410000, China.
ORCID-Profile: Jie Chen
Förderung
- Science and Technology Program of Hunan Provincial Department of Transportation
- National Natural Science Foundation of China
- Key R&D plan project of Science and Technology Department of Hunan Province
- Natural Science Foundation of Hunan Province
- Hunan Provincial Department of Education Project
Zitieren
APA
Lu, B., Chen, J., Xiang, S., Peng, Z., Liu, C., Yu, H., & Ye, Y. (2026). Research on the Mechanical Durability Performance and Action Mechanism of Basalt Fiber-Reinforced Concrete for Ship Lock Wall. Polymers, 18(13), 1587. https://doi.org/10.3390/polym18131587
Vancouver
Lu B, Chen J, Xiang S, Peng Z, Liu C, Yu H, et al. Research on the Mechanical Durability Performance and Action Mechanism of Basalt Fiber-Reinforced Concrete for Ship Lock Wall. Polymers. 2026;18(13):1587. doi:10.3390/polym18131587
BibTeX
@article{Lu2026,
author = {Lu, Benkun and Chen, Jie and Xiang, Shuncheng and Peng, Zhe and Liu, Changyu and Yu, Haotian and Ye, Yasi},
title = {Research on the Mechanical Durability Performance and Action Mechanism of Basalt Fiber-Reinforced Concrete for Ship Lock Wall},
journal = {Polymers},
year = {2026},
volume = {18},
number = {13},
pages = {1587},
doi = {10.3390/polym18131587}
}
EUVIMED