EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Electrospinning CaCO3/Porous PLA Nanofibers for Daytime Radiative Cooling

Yangyang Sun, Changnai Yang, Mengge Li, Xiaomin Zeng, Dengkun Su, Shiyi Pan, Yu Zhang, Qiong Jiang, Shizhe Lin

Polymers · 25.06.2026 · 18 (13) · 1580

DOI: 10.3390/polym18131580 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.06.2026. Verfasst von Yangyang Sun und 8 weiteren Autor:innen. Beteiligte Einrichtung: Guangxi Key Laboratory of Optical and Electronic Materials and Devices, College of Materials Science and Engineering, Guilin University of Technology…. Die Arbeit nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Guangxi Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To develop high-performance and eco-friendly passive daytime radiative cooling (PDRC) materials, calcium carbonate (CaCO3)/porous polylactic acid (PLA) nanofibers were fabricated via electrospinning. This fabrication utilized PLA as the matrix and 40 nm CaCO3 nanoparticles as fillers, with ambient humidity controlled above 85%RH during electrospinning. The resulting nanofibers possessed numerous CaCO3/PLA interfaces and porous surface structures. Experimental results demonstrated that the CaCO3/porous PLA nanofibers achieved a solar reflectivity of ~92.3%, significantly exceeding that of PLA (~72.1%), CaCO3/PLA (~86.0%), and porous PLA (~79.6%) nanofibers. During outdoor testing, CaCO3/porous PLA nanofibers exhibited optimal PDRC performance with a temperature reduction of ~10.3 °C, representing a 6.1 °C improvement compared to PLA nanofibers. This enhancement is attributed to synergistic light-scattering sites generated by surface porosity and CaCO3/PLA interfaces, which collectively strengthen solar spectrum scattering. Furthermore, significant morphological degradation was observed after 80-day soil burial, confirming biodegradability. This study proposes a facile strategy for developing high-performance eco-friendly PDRC materials.

Schlagwörter

Stichwörter der Autor:innen

interfacenanofiberpassive daytime radiative coolingporous structure

Autor:innen und Institutionen

  • Guangxi Key Laboratory of Optical and Electronic Materials and Devices, College of Materials Science and Engineering, Guilin University of Technology, Guilin 541004, China.
  • Medical College of Guangxi University, Guangxi University, Nanning 530004, China.

Förderung

  • National Natural Science Foundation of China
  • Guangxi Natural Science Foundation

Zitieren

APA

Sun, Y., Yang, C., Li, M., Zeng, X., Su, D., Pan, S., Zhang, Y., Jiang, Q., & Lin, S. (2026). Electrospinning CaCO3/Porous PLA Nanofibers for Daytime Radiative Cooling. Polymers, 18(13), 1580. https://doi.org/10.3390/polym18131580

Vancouver

Sun Y, Yang C, Li M, Zeng X, Su D, Pan S, et al. Electrospinning CaCO3/Porous PLA Nanofibers for Daytime Radiative Cooling. Polymers. 2026;18(13):1580. doi:10.3390/polym18131580

BibTeX
@article{Sun2026,
  author = {Sun, Yangyang and Yang, Changnai and Li, Mengge and Zeng, Xiaomin and Su, Dengkun and Pan, Shiyi and Zhang, Yu and Jiang, Qiong and Lin, Shizhe},
  title = {Electrospinning CaCO3/Porous PLA Nanofibers for Daytime Radiative Cooling},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {13},
  pages = {1580},
  doi = {10.3390/polym18131580}
}
Kostenlos starten →