EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Self-Standing Cutin Isolate Films

Nevena Hromiš iD, Sandra Bučko iD, Zorica Stojanović iD, Senka Popović iD, Biljana Pajin, Milica Stožinić iD, Di Zhang, Nejra Omerović iD, Jaroslav Katona iD

Polymers · 25.06.2026 · 18 (13) · 1579

DOI: 10.3390/polym18131579 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.06.2026. Verfasst von Nevena Hromiš und 8 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Technology Novi Sad, University of Novi Sad, Bul. Cara Lazara 1, 21000 Novi Sad, Serbia. Die Arbeit nennt 49 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development, and Innovation, Ministry of Science, Technological Development, and Innovation of the Republic of Serbia.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cutin, a natural polyester, has attracted attention as a precursor for bio-based materials mimicking plant cuticles, particularly in food packaging. Most studies focus on polycondensation of hydrolyzed cutin fractions or combining cutin hydrolysates with other components; however, cutin precipitation, conditions affecting it, and cutin isolate film properties, without addition of other filmogenic material, remain insufficiently understood. Owing to the pH-dependent solubility of cutin, which progressively decreases as pH is lowered from strongly alkaline to acidic conditions, this study investigates the influence of pH on cutin dispersion formation and characteristics, and evaluates the impact of these dispersion properties on the formation and performance of self-assembled cutin isolate films, with a view to developing films with improved water-barrier and moisture-resistance properties. The influence of three plasticizers, glycerol, propylene glycol, and polyethylene glycol 400, at two concentrations was also evaluated. Results demonstrated that pH is the primary factor influencing cutin isolate dispersion characteristics and film performance, with decreasing pH promoting cutin precipitation and particle aggregation, thereby inducing changes in film structure. The strongest effects were observed for swelling, solubility, and tensile strength, followed by water vapor permeability, elongation at break, and thickness. Plasticizer type mainly affected moisture content and significantly influenced permeability and thickness, while concentration of plasticizer primarily impacted permeability. Interactions between pH and plasticizer significantly influenced most properties. Films prepared from cutin dispersions at pH 6.5 and pH 5 with polyethylene glycol (10%) showed the best balance of mechanical and barrier properties. Additionally, films prepared from the cutin solutions at pH 12 with glycerol (20%) exhibited good mechanical performance and high solubility, suitable for specific applications.

Schlagwörter

Stichwörter der Autor:innen

biomaterialscutin filmscutin isolatecutin particlesfood packagingpH dependent precipitation

Autor:innen und Institutionen

  • Faculty of Technology Novi Sad, University of Novi Sad, Bul. Cara Lazara 1, 21000 Novi Sad, Serbia.
  • School of Food and Biological Engineering, Jiangsu University, Zhenjiang 212013, China.
  • BioSense Institute, University of Novi Sad, 21000 Novi Sad, Serbia.

ORCID-Profile: Nevena Hromiš, Sandra Bučko, Zorica Stojanović, Senka Popović, Milica Stožinić, Nejra Omerović, Jaroslav Katona

Förderung

  • Ministry of Science, Technological Development, and Innovation
  • Ministry of Science, Technological Development, and Innovation of the Republic of Serbia

Zitieren

APA

Hromiš, N., Bučko, S., Stojanović, Z., Popović, S., Pajin, B., Stožinić, M., Zhang, D., Omerović, N., & Katona, J. (2026). Self-Standing Cutin Isolate Films. Polymers, 18(13), 1579. https://doi.org/10.3390/polym18131579

Vancouver

Hromiš N, Bučko S, Stojanović Z, Popović S, Pajin B, Stožinić M, et al. Self-Standing Cutin Isolate Films. Polymers. 2026;18(13):1579. doi:10.3390/polym18131579

BibTeX
@article{Hromi2026,
  author = {Hromiš, Nevena and Bučko, Sandra and Stojanović, Zorica and Popović, Senka and Pajin, Biljana and Stožinić, Milica and Zhang, Di and Omerović, Nejra and Katona, Jaroslav},
  title = {Self-Standing Cutin Isolate Films},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {13},
  pages = {1579},
  doi = {10.3390/polym18131579}
}
Kostenlos starten →