EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Durability of Steel Bridge Deck Paving Materials Under Salt Attack in Coastal Hot–Humid Environments

Yujie Zhang, Xiong Lan, Zhenqiang Han iD, Lei Zhu, Peidong Du, Zaiqin Chen, Aimin Sha

Polymers · 18.06.2026 · 18 (12) · 1519

DOI: 10.3390/polym18121519 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 18.06.2026. Verfasst von Yujie Zhang und 6 weiteren Autor:innen. Beteiligte Einrichtung: School of Highway, Chang'an University, Xi'an 710064, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangxi Key Research and Development Program, Guangxi Transportation Science and Technology Achievement Promotion Project, Chang’an University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Steel bridge deck pavements in coastal hot–humid regions are often exposed to the combined effects of moisture, salt, and temperature, which can accelerate material deterioration and shorten service life. To clarify the durability behavior of typical paving materials under such conditions, a comparative study was conducted on three asphalt mixtures used for steel bridge deck pavements: epoxy asphalt mixture (EA-10), dense-graded asphalt mixture (AC-13), and stone mastic asphalt mixture (SMA-10). The mixtures were subjected to hygrothermal salt-water cycling using a mixed chloride-sulfate solution, and their durability was evaluated through air void content, indirect tensile strength, and four-point bending fatigue tests. The results showed varying degrees of deterioration. The air void content of AC-13 increased by about 41.4% after 28 d at 60 °C, suggesting greater susceptibility to internal void damage under severe conditioning. The indirect tensile strength also decreased with wet–dry cycling; at 60 °C and 28 d, the strength retention of EA-10 remained 76.9%, higher than those of AC-13 and SMA-10. After conditioning at 60 °C, the fitted slope of fatigue life for SMA-10 reached −0.0052, compared with −0.0044 for AC-13 and 0.0027 for EA-10, indicating that SMA-10 was the most sensitive to hygrothermal salt attack, whereas EA-10 was the least affected. Overall, the resistance to hygrothermal salt-water damage followed the order EA-10 > AC-13 > SMA-10. The findings help clarify the durability behavior of steel bridge deck paving materials in coastal environments and provide support for durability-oriented material selection.

Schlagwörter

Stichwörter der Autor:innen

durabilityfour-point bending fatiguehygrothermal salt-water cyclingindirect tensile strengthsalt attacksteel bridge deck paving materials

Autor:innen und Institutionen

  • School of Highway, Chang'an University, Xi'an 710064, China.
  • Guangxi Transportation Investment Group Co., Ltd., Wuzhou Expressway Operation Co., Ltd., Wuzhou 543300, China.
  • Guangxi Rongwu Expressway Co., Ltd., Wuzhou 543300, China.
  • Key Laboratory for Special Area Highway Engineering of Ministry of Education, Chang'an University, Xi'an 710064, China.

ORCID-Profile: Zhenqiang Han

Förderung

  • Guangxi Key Research and Development Program
  • Guangxi Transportation Science and Technology Achievement Promotion Project
  • Chang’an University

Zitieren

APA

Zhang, Y., Lan, X., Han, Z., Zhu, L., Du, P., Chen, Z., & Sha, A. (2026). Durability of Steel Bridge Deck Paving Materials Under Salt Attack in Coastal Hot–Humid Environments. Polymers, 18(12), 1519. https://doi.org/10.3390/polym18121519

Vancouver

Zhang Y, Lan X, Han Z, Zhu L, Du P, Chen Z, et al. Durability of Steel Bridge Deck Paving Materials Under Salt Attack in Coastal Hot–Humid Environments. Polymers. 2026;18(12):1519. doi:10.3390/polym18121519

BibTeX
@article{Zhang2026,
  author = {Zhang, Yujie and Lan, Xiong and Han, Zhenqiang and Zhu, Lei and Du, Peidong and Chen, Zaiqin and Sha, Aimin},
  title = {Durability of Steel Bridge Deck Paving Materials Under Salt Attack in Coastal Hot–Humid Environments},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {12},
  pages = {1519},
  doi = {10.3390/polym18121519}
}
Kostenlos starten →