A MOORA-Based Evaluation of Printed Conductive Fabrics for E-Textile Product Design
Polymers · 12.06.2026 · 18 (12) · 1478
DOI: 10.3390/polym18121478 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 12.06.2026. Verfasst von Elanur Demirci und 7 weiteren Autor:innen. Beteiligte Einrichtung: Department of Textile Engineering, Istanbul Technical University, Istanbul 34437, Turkey. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Istanbul Technical University.
Abstract (Originalsprache)
Electronic textiles (e-textiles) have gained significant importance due to their potential to enable wearable electronic systems. Conductive pathways in textiles can be fabricated using various approaches; among these, printing technologies stand out for their cost-effectiveness and suitability for rapid design customization. In this study, conductive patterns were produced on 100% cotton woven fabrics using rotary screen printing with different conductive paste formulations and printing layer configurations. The electrical resistance, fabric thickness, microscopic surface morphology, tensile strength, elongation, and tearing strength of the printed e-textiles were evaluated. Results indicated that resistance decreased with increasing printed track width and number of printed layers, with samples A4 and A5 exhibiting the highest conductivity. Thickness measurements and microscopic surface images showed that repeated printing increased layer build-up and surface coverage, particularly for A3 and A4. Mechanical performance tests revealed reductions in tensile strength, elongation, and tear strength after printing, attributed to restricted fiber mobility caused by the conductive paste and curing process. Despite these reductions, the mechanical property losses remained within acceptable limits for wearable applications. To determine the most suitable conductive textile for use in electronic textile product design, the Multi-Objective Optimization on the Basis of Ratio Analysis (MOORA) method, a multi-criteria decision-making (MCDM) approach, was applied using mechanical performance criteria. Electrical resistance was evaluated separately as a functional performance indicator and interpreted together with the MOORA-based mechanical ranking. Considering both mechanical and electrical performance, sample A5 was identified as the optimal alternative. Overall, this study demonstrates that printed conductive textiles can be systematically evaluated and ranked using a multi-criteria decision-making approach for material selection in wearable electronics.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Textile Engineering, Istanbul Technical University, Istanbul 34437, Turkey.
- Department of Industrial Design Engineering, Erciyes University, Kayseri 38030, Turkey.
- Department of Textile Engineering, Dokuz Eylul University, Izmir 35397, Turkey.
- EPS Technology, Izmir 35040, Turkey.
ORCID-Profile: Elanur Demirci, Meltem Tekcin, Ismet Ege Kalkan, Esra Akgül, Elcin Emekdar-Karaman, Umut Kivanc Sahin, Serhat Karakaya
Förderung
- Istanbul Technical University
Zitieren
APA
Demirci, E., Tekcin, M., Kalkan, I. E., Akgül, E., Emekdar-Karaman, E., Sahin, U. K., Ozkayalar, S., & Karakaya, S. (2026). A MOORA-Based Evaluation of Printed Conductive Fabrics for E-Textile Product Design. Polymers, 18(12), 1478. https://doi.org/10.3390/polym18121478
Vancouver
Demirci E, Tekcin M, Kalkan IE, Akgül E, Emekdar-Karaman E, Sahin UK, et al. A MOORA-Based Evaluation of Printed Conductive Fabrics for E-Textile Product Design. Polymers. 2026;18(12):1478. doi:10.3390/polym18121478
BibTeX
@article{Demirci2026,
author = {Demirci, Elanur and Tekcin, Meltem and Kalkan, Ismet Ege and Akgül, Esra and Emekdar-Karaman, Elcin and Sahin, Umut Kivanc and Ozkayalar, Simge and Karakaya, Serhat},
title = {A MOORA-Based Evaluation of Printed Conductive Fabrics for E-Textile Product Design},
journal = {Polymers},
year = {2026},
volume = {18},
number = {12},
pages = {1478},
doi = {10.3390/polym18121478}
}
EUVIMED