Different Forms of the Adaptogen Bacopa monnieri (Brahmi) in the Synthesis of RPU/PIR Foams
Polymers · 11.06.2026 · 18 (12) · 1471
DOI: 10.3390/polym18121471 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 11.06.2026. Verfasst von Joanna Liszkowska und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry and Technology of Polyurethanes, Faculty of Materials Engineering, Kazimierz Wielki University, J. K. Chodkiewicza 30, PL 85-…. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Various forms of Bacopa monnieri (BM), including original powder (Mp), tea form (Mo), and post-extraction residues (Mf), were used as natural bio-based additives in rigid polyurethane–polyisocyanurate (RPU/PIR) foams. The study investigated the influence of BM form and content on the physical, mechanical, thermal, and flammability properties of the foams. The results demonstrated that both the type and concentration of BM significantly affected foam performance. Foams containing Mf exhibited the lowest apparent density and reduced brittleness, whereas foams modified with Mp showed the highest compressive strength. The incorporation of BM also contributed to reduced flammability and enhanced thermal resistance of the foams. Thermal analysis indicated that BM additives modified the degradation behavior of RPU/PIR foams by promoting char formation and improving thermal stability at elevated temperatures. In particular, samples containing tea and post-extraction residues showed increased stability of the carbonized residue during the final degradation stage. The most favorable overall properties were obtained for BM contents between 3 and 7 wt%, while higher filler concentrations negatively affected the structural integrity of the foam matrix. The results confirm that the performance of RPU/PIR foams strongly depends on the balance between matrix continuity and biofiller functionality. The obtained materials show potential for application in floristry products and lightweight insulating systems where low density, dimensional stability, and enhanced thermal resistance are required.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Chemistry and Technology of Polyurethanes, Faculty of Materials Engineering, Kazimierz Wielki University, J. K. Chodkiewicza 30, PL 85-064 Bydgoszcz, Poland.
- Department of Chemical and Biochemical Engineering, Faculty of Chemical Technology and Engineering, Bydgoszcz University of Science and Technology, Seminaryjna 3, 85-326 Bydgoszcz, Poland.
- Department of Polymer Materials Engineering, Faculty of Materials Engineering, Kazimierz Wielki University, J. K. Chodkiewicza 30, PL 85-064 Bydgoszcz, Poland.
ORCID-Profile: Joanna Liszkowska, Justyna Miłek, Krzysztof Moraczewski, Krzysztof Szabliński
Zitieren
APA
Liszkowska, J., Miłek, J., Moraczewski, K., & Szabliński, K. (2026). Different Forms of the Adaptogen Bacopa monnieri (Brahmi) in the Synthesis of RPU/PIR Foams. Polymers, 18(12), 1471. https://doi.org/10.3390/polym18121471
Vancouver
Liszkowska J, Miłek J, Moraczewski K, Szabliński K. Different Forms of the Adaptogen Bacopa monnieri (Brahmi) in the Synthesis of RPU/PIR Foams. Polymers. 2026;18(12):1471. doi:10.3390/polym18121471
BibTeX
@article{Liszkowska2026,
author = {Liszkowska, Joanna and Miłek, Justyna and Moraczewski, Krzysztof and Szabliński, Krzysztof},
title = {Different Forms of the Adaptogen Bacopa monnieri (Brahmi) in the Synthesis of RPU/PIR Foams},
journal = {Polymers},
year = {2026},
volume = {18},
number = {12},
pages = {1471},
doi = {10.3390/polym18121471}
}
EUVIMED