EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Epoxy/Layered Double Hydroxide Nanocomposites: Investigating the Influence of Preparation Method on Mechanical Properties

Daiva Zeleniakiene iD, Kristina Zukiene iD, Stanislav Stankevich iD, Petr Knotek iD, Claudia M Rocha iD, Jakub Oprsal iD, Rochele Pinto iD, Sigitas Kilikevičius iD, Cristina Neves iD, João Tedim iD

Polymers · 09.06.2026 · 18 (12) · 1444

DOI: 10.3390/polym18121444 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.06.2026. Verfasst von Daiva Zeleniakiene und 9 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Kaunas University of Technology, Studentu St. 56, 51424 Kaunas, Lithuania. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Commission, ERDF "Innovative materials suitable for high added value applications (INMA)", FCT/MCTES (PIDDAC).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the macro- and micromechanical properties of epoxy-based nanocomposites containing Mg-Al/NO3 layered double hydroxides (LDHs), with a comparative evaluation of two preparation routes: solvent exchange and direct drying from an aqueous LDH slurry. LDHs were characterised using atomic force microscopy (AFM), scanning transmission electron microscopy, and X-ray diffraction methods. Tensile tests and AFM nanomechanical mapping were used to obtain the macro- and micromechanical properties of LDH/epoxy nanocomposites, respectively. Both preparation methods resulted in nanocomposites with comparable mechanical performance. Young’s modulus increased by approximately 30–70% at lower LDH loadings (1–2 wt.%), and the ultimate tensile strength remained largely unchanged compared to pure epoxy. At higher LDH contents, tensile strength decreased by approximately 15–26%, while fracture strain decreased by up to 54%, which was attributed to particle aggregation, as confirmed by scanning electron microscopy and energy-dispersive X-ray spectroscopy. The mechanical response and stiffness maps obtained by the peak force AFM nanomechanical mapping revealed that nanocomposites prepared using solvent-exchanged LDHs exhibit significantly narrower interfacial widths and higher stiffness compared to those made by the conventional approach, indicating improved interfacial bonding and mechanical performance. Overall, the solvent-exchange approach proved effective for improving the interfacial properties and stiffness of epoxy/LDH nanocomposites.

Schlagwörter

Stichwörter der Autor:innen

epoxylayered double hydroxidesmechanical propertiesnanocomposite

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Kaunas University of Technology, Studentu St. 56, 51424 Kaunas, Lithuania.
  • Department of Production Engineering, Kaunas University of Technology, Studentu St. 56, 51424 Kaunas, Lithuania.
  • Institute for Mechanics of Materials, University of Latvia, Jelgavas St. 3, LV-1004 Riga, Latvia.
  • Department of General and Inorganic Chemistry, University of Pardubice, Studentska 573, 532 10 Pardubice, Czech Republic.
  • Smallmatek-Small Materials and Technologies, Lda, Rua dos Canhas, 3810-075 Aveiro, Portugal.
  • SYNPO a.s., S. K. Neumanna 1316, 532 07 Pardubice, Czech Republic.

ORCID-Profile: Daiva Zeleniakiene, Kristina Zukiene, Stanislav Stankevich, Petr Knotek, Claudia M Rocha, Jakub Oprsal, Rochele Pinto, Sigitas Kilikevičius, Cristina Neves, João Tedim

Förderung

  • European Commission
  • ERDF "Innovative materials suitable for high added value applications (INMA)"
  • FCT/MCTES (PIDDAC)
  • European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie
  • ERDF
  • CICECO-Aveiro Institute of Materials
  • FCT

Zitieren

APA

Zeleniakiene, D., Zukiene, K., Stankevich, S., Knotek, P., Rocha, C. M., Oprsal, J., Pinto, R., Kilikevičius, S., Neves, C., & Tedim, J. (2026). Epoxy/Layered Double Hydroxide Nanocomposites: Investigating the Influence of Preparation Method on Mechanical Properties. Polymers, 18(12), 1444. https://doi.org/10.3390/polym18121444

Vancouver

Zeleniakiene D, Zukiene K, Stankevich S, Knotek P, Rocha CM, Oprsal J, et al. Epoxy/Layered Double Hydroxide Nanocomposites: Investigating the Influence of Preparation Method on Mechanical Properties. Polymers. 2026;18(12):1444. doi:10.3390/polym18121444

BibTeX
@article{Zeleniakiene2026,
  author = {Zeleniakiene, Daiva and Zukiene, Kristina and Stankevich, Stanislav and Knotek, Petr and Rocha, Claudia M and Oprsal, Jakub and Pinto, Rochele and Kilikevičius, Sigitas and Neves, Cristina and Tedim, João},
  title = {Epoxy/Layered Double Hydroxide Nanocomposites: Investigating the Influence of Preparation Method on Mechanical Properties},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {12},
  pages = {1444},
  doi = {10.3390/polym18121444}
}
Kostenlos starten →