Shear Behavior of GMTC/BPC-GCL Interface Under Dry and Hydrated Conditions with Varying Polymer Content
Polymers · 07.06.2026 · 18 (12) · 1423
DOI: 10.3390/polym18121423 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 07.06.2026. Verfasst von Juan Hou und 2 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanics and Engineering Science, Shanghai University, Shanghai 200444, China. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Qinghai Provincial Department of Science and Technology International Cooperation Project, 2023 Basic Research Program of Qinghai Province.
Abstract (Originalsprache)
Polymeric geosynthetics serve as fundamental components of engineered composite liners in waste containment facilities. The interface shear behavior between a coextruded textured geomembrane (GMTC) and a bentonite–polymer composite geosynthetic clay liner (BPC-GCL) was investigated under both dry and hydrated conditions, with varying polymer content (0%, 3.5%, and 5.5%), using large-scale direct shear tests. Hydration of BPC-GCL was found to significantly reduce GMTC/BPC-GCL interface shear strengths, with the magnitude of reduction increasing with normal stress. For the BPC-GCL with 3.5% polymer content, the peak strength at 400 kPa decreased by 36% from 272 kPa (dry) to 175 kPa (hydrated), which was attributed to bentonite softening and reduced frictional resistance. Polymer content non-linearly influenced shear behavior. At 400 kPa, the 3.5% BPC-GCL exhibited an 18% higher peak strength than the conventional GCL, while the 5.5% BPC-GCL showed a 9% reduction compared to the 3.5% specimen, attributed to internal structural damage and interfacial lubrication. Visual post-shear inspections revealed that dry conditions promoted interfacial friction-dominated failure, while hydration induced significant internal BPC-GCL damage, including fiber break and bentonite extrusion. The failure mode shifted with polymer content, and conventional GCL failed through internal bentonite deformation, while BPC-GCL exhibited a composite mechanism combining internal reinforcement and interfacial friction, with the 3.5% BPC-GCL demonstrating a more favorable composite effect than the 5.5% BPC-GCL. The study underscored the critical roles of hydration conditions and polymer modification in governing the shear mechanisms and strength at the GMTC/BPC-GCL interface.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanics and Engineering Science, Shanghai University, Shanghai 200444, China.
- School of Engineering, University of Virginia, Charlottesville, VA 22904, USA.
- School of Civil Engineering and Water Resources, Qinghai University, Xining 810016, China.
ORCID-Profile: Juan Hou
Förderung
- National Natural Science Foundation of China
- Qinghai Provincial Department of Science and Technology International Cooperation Project
- 2023 Basic Research Program of Qinghai Province
- China Scholarship Council
Zitieren
APA
Hou, J., Shi, Z., & Xie, X. (2026). Shear Behavior of GMTC/BPC-GCL Interface Under Dry and Hydrated Conditions with Varying Polymer Content. Polymers, 18(12), 1423. https://doi.org/10.3390/polym18121423
Vancouver
Hou J, Shi Z, Xie X. Shear Behavior of GMTC/BPC-GCL Interface Under Dry and Hydrated Conditions with Varying Polymer Content. Polymers. 2026;18(12):1423. doi:10.3390/polym18121423
BibTeX
@article{Hou2026,
author = {Hou, Juan and Shi, Zhenyi and Xie, Xuelei},
title = {Shear Behavior of GMTC/BPC-GCL Interface Under Dry and Hydrated Conditions with Varying Polymer Content},
journal = {Polymers},
year = {2026},
volume = {18},
number = {12},
pages = {1423},
doi = {10.3390/polym18121423}
}
EUVIMED