EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Biodegradability of Poly(L-Lactic Acid) via Incorporation of Thermoplastic Chitosan

Yodthong Baimark iD, Prasong Srihanam iD, Yaowalak Srisuwan

Polymers · 05.06.2026 · 18 (11) · 1404

DOI: 10.3390/polym18111404 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 05.06.2026. Verfasst von Yodthong Baimark und 2 weiteren Autor:innen. Beteiligte Einrichtung: Biodegradable Polymers Research Unit, Department of Chemistry and Centre of Excellence for Innovation in Chemistry, Faculty of Science, Mahasarakham …. Die Arbeit nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Thailand Science Research and Innovation, Office of the Higher Education Commission.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Poly(L-lactic acid) (PLLA) is a biodegradable polyester that has garnered widespread attention for its potential applications as a replacement for conventional petroleum-based plastics. However, PLLA’s prolonged biodegradation is a significant limitation in its applications, particularly in single-use packaging, as it can lead to environmental accumulation and hinder the sustainability goals of reducing plastic waste. This paper examines the effect of incorporating thermoplastic chitosan (TPC) on the mechanical and biodegradation properties of PLLA. TPC was prepared using lactic acid as a plasticizer. PLLA/TPC composites were produced by thermo-mechanical processes. TPC contents of 1%, 2.5%, 5%, and 10% were investigated. The PLLA/TPC films exhibited distinct phase separation, as verified by scanning electron microscopy analysis. The incorporation of 2.5% TPC led to a 20.8% enhancement in elongation at break and a 7.4% improvement in tensile toughness relative to pure PLLA film. Nonetheless, both values diminished when the TPC content surpassed 2.5 wt%. The surface wettability of the PLLA/TPC films, assessed via water contact angle measurements and weight loss from soil burial tests, enhanced with greater TPC content. The PLLA/TPC films showed significantly greater weight loss after being buried in soil for 12 months compared to pure PLLA film. The increases in weight loss were 4, 11, 14, and 72 times greater for the TPC contents of 1%, 2.5%, 5%, and 10%, respectively. Incorporating TPC in this study improved the flexibility and biodegradability of PLLA, leading to PLLA-based composites with enhanced potential for environmentally sustainable single-use packaging.

Schlagwörter

Stichwörter der Autor:innen

biocompositebiodegradationchitosanmechanical propertiespoly(lactic acid)

Autor:innen und Institutionen

  • Biodegradable Polymers Research Unit, Department of Chemistry and Centre of Excellence for Innovation in Chemistry, Faculty of Science, Mahasarakham University, Maha Sarakham 44150, Thailand.

ORCID-Profile: Yodthong Baimark, Prasong Srihanam

Förderung

  • Thailand Science Research and Innovation
  • Office of the Higher Education Commission

Zitieren

APA

Baimark, Y., Srihanam, P., & Srisuwan, Y. (2026). Enhancing Biodegradability of Poly(L-Lactic Acid) via Incorporation of Thermoplastic Chitosan. Polymers, 18(11), 1404. https://doi.org/10.3390/polym18111404

Vancouver

Baimark Y, Srihanam P, Srisuwan Y. Enhancing Biodegradability of Poly(L-Lactic Acid) via Incorporation of Thermoplastic Chitosan. Polymers. 2026;18(11):1404. doi:10.3390/polym18111404

BibTeX
@article{Baimark2026,
  author = {Baimark, Yodthong and Srihanam, Prasong and Srisuwan, Yaowalak},
  title = {Enhancing Biodegradability of Poly(L-Lactic Acid) via Incorporation of Thermoplastic Chitosan},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1404},
  doi = {10.3390/polym18111404}
}
Kostenlos starten →