EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The Influence of Fiber Tension and Filament Winding Patterns on the Strength of Thin-Walled Fiber-Reinforced Polymer Composite Tubes

Karolina Paczkowska iD, Zuzanna Pacholec iD, Wojciech Błażejewski iD

Polymers · 04.06.2026 · 18 (11) · 1394

DOI: 10.3390/polym18111394 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.06.2026. Verfasst von Karolina Paczkowska und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Smoluchowskiego 25, 50-370 Wroclaw, Pola…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Wrocław University of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effects of filament winding parameters (tension and mosaic pattern) on the mechanical performance of thin-walled fiber-reinforced polymer composite tubes under internal pressure. The pressure was generated through axial compression of an elastomeric insert, providing a controlled alternative to conventional hydrostatic burst testing. Tubes were manufactured with different combinations of winding tension (10–50 N) in the ±55° and hoop layers. Within the ±55° layer, several mosaic pattern configurations were tested. Structural responses were evaluated using pressure testing, Digital Image Correlation (DIC), and Scanning Electron Microscopy (SEM). 20 N was identified as the most efficient tension level, improving interlaminar integrity and increasing hoop tensile strength by approximately 8–13%. Specimens with a hoop layer failed abruptly by hoop-dominated brittle fracture, characterized by longitudinal splitting and fiber rupture in the circumferential direction. Among the investigated mosaic configurations, the 3/3 pattern demonstrated the most efficient structural response—the mean hoop tensile strength (1088 ± 43 MPa) was approximately 31–40% higher than that of the remaining configurations (722–798 MPa). Overall, the results indicate that both winding tension and mosaic pattern influence the failure pressure, with optimized configurations contributing to improved pressure resistance and structural consistency.

Schlagwörter

Stichwörter der Autor:innen

DICcomposite tubesfilament windingwinding patternwinding tension

Autor:innen und Institutionen

  • Department of Mechanics, Materials and Biomedical Engineering, Wroclaw University of Science and Technology, Smoluchowskiego 25, 50-370 Wroclaw, Poland.

ORCID-Profile: Karolina Paczkowska, Zuzanna Pacholec, Wojciech Błażejewski

Förderung

  • Wrocław University of Science and Technology

Zitieren

APA

Paczkowska, K., Pacholec, Z., & Błażejewski, W. (2026). The Influence of Fiber Tension and Filament Winding Patterns on the Strength of Thin-Walled Fiber-Reinforced Polymer Composite Tubes. Polymers, 18(11), 1394. https://doi.org/10.3390/polym18111394

Vancouver

Paczkowska K, Pacholec Z, Błażejewski W. The Influence of Fiber Tension and Filament Winding Patterns on the Strength of Thin-Walled Fiber-Reinforced Polymer Composite Tubes. Polymers. 2026;18(11):1394. doi:10.3390/polym18111394

BibTeX
@article{Paczkowska2026,
  author = {Paczkowska, Karolina and Pacholec, Zuzanna and Błażejewski, Wojciech},
  title = {The Influence of Fiber Tension and Filament Winding Patterns on the Strength of Thin-Walled Fiber-Reinforced Polymer Composite Tubes},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1394},
  doi = {10.3390/polym18111394}
}
Kostenlos starten →