EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Enhancement and Fracture Mechanisms of SLA Photopolymer Composites Reinforced with Fish Bone Ash

Cem Alparslan iD, Mert Minaz, Erhan Baysal iD, Muhammed Fatih Yentimur iD, Oğuz Koçar iD, Şenol Bayraktar iD

Polymers · 29.05.2026 · 18 (11) · 1348

DOI: 10.3390/polym18111348 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.05.2026. Verfasst von Cem Alparslan und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Faculty of Engineering and Architecture, Recep Tayyip Erdoğan University, Rize 53100, Türkiye. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Recep Tayyip Erdoğan University Development Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this study, salmon fish bone waste from the fish processing industry was converted into an inorganic ash filler by calcination and incorporated into an SLA-compatible photopolymer resin at 4, 8, and 12 wt.%. To compensate for filler-induced optical scattering and rheological changes, the printing parameters were systematically optimized, and the optimum conditions were identified as a layer thickness of 30 µm and an exposure time of 12 s. Tensile tests performed in accordance with ASTM D638 Type IV showed that fish bone ash significantly enhanced the tensile strength of the photopolymer matrix, increasing it from 24.8 MPa for the neat resin to 37.95 MPa at 12 wt.% filler loading. In contrast, increasing filler content reduced elongation at break and promoted a more brittle fracture response. Statistical evaluation using Welch ANOVA and Games–Howell post hoc analysis confirmed that filler loading had a statistically significant effect on tensile strength (p < 0.05). FTIR analysis revealed that the filler remained chemically stable within the matrix and that the interfacial interactions were predominantly physical rather than covalent. SEM observations indicated that low and medium filler loadings improved crack deflection and energy dissipation, whereas particle agglomeration at higher loading increased the tendency for brittle fracture. These findings demonstrate that fish bone ash can be used as a sustainable bio-waste-derived reinforcement to improve the mechanical performance of SLA photopolymer composites.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingbio-wastephotopolymer compositesalmon fish bone ashstereolithographysustainable filler

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Faculty of Engineering and Architecture, Recep Tayyip Erdoğan University, Rize 53100, Türkiye.
  • FDM and Metallography Laboratory, Department of Mechanical Engineering, Recep Tayyip Erdoğan University, Rize 53100, Türkiye.
  • Department of Aquaculture, Recep Tayyip Erdoğan University, Rize 53100, Türkiye.
  • Alapli Vocational School, Zonguldak Bülent Ecevit University, Zonguldak 67850, Türkiye.
  • Department of Civil Engineering, Faculty of Engineering and Architecture, Recep Tayyip Erdogan University, Rize 53100, Türkiye.
  • Department of Mechanical Engineering, Faculty of Engineering, Zonguldak Bülent Ecevit University, Zonguldak 67100, Türkiye.

ORCID-Profile: Cem Alparslan, Erhan Baysal, Muhammed Fatih Yentimur, Oğuz Koçar, Şenol Bayraktar

Förderung

  • Recep Tayyip Erdoğan University Development Foundation

Zitieren

APA

Alparslan, C., Minaz, M., Baysal, E., Yentimur, M. F., Koçar, O., & Bayraktar, Ş. (2026). Mechanical Enhancement and Fracture Mechanisms of SLA Photopolymer Composites Reinforced with Fish Bone Ash. Polymers, 18(11), 1348. https://doi.org/10.3390/polym18111348

Vancouver

Alparslan C, Minaz M, Baysal E, Yentimur MF, Koçar O, Bayraktar Ş. Mechanical Enhancement and Fracture Mechanisms of SLA Photopolymer Composites Reinforced with Fish Bone Ash. Polymers. 2026;18(11):1348. doi:10.3390/polym18111348

BibTeX
@article{Alparslan2026,
  author = {Alparslan, Cem and Minaz, Mert and Baysal, Erhan and Yentimur, Muhammed Fatih and Koçar, Oğuz and Bayraktar, Şenol},
  title = {Mechanical Enhancement and Fracture Mechanisms of SLA Photopolymer Composites Reinforced with Fish Bone Ash},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1348},
  doi = {10.3390/polym18111348}
}
Kostenlos starten →