EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Processing-Dependent Incorporation of Food By-Product Extract into Zein-Based Active Packaging Films

Chiara Bufalini, Junyang Li, Emanuela Drago iD, Alberto Lagazzo iD, Roberta Campardelli iD

Polymers · 29.05.2026 · 18 (11) · 1347

DOI: 10.3390/polym18111347 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 29.05.2026. Verfasst von Chiara Bufalini und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil, Chemical and Environmental Engineering, University of Genoa, Via Opera Pia, 15, 16145 Genoa, Italy. Die Arbeit nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The recovery of antioxidant compounds from agri-food by-products represents a sustainable strategy for active packaging production. However, the compatibility between natural extracts and film-forming techniques plays a key role in determining film formation and properties. In this work, antioxidant extracts obtained from spent coffee grounds and tomato waste were incorporated into zein-based films produced using two different techniques. The objective was to investigate how extract type and processing technique influence film morphology, wettability, thickness, and mechanical properties. The results demonstrated a strong processing-dependent compatibility between extract composition and production techniques. Spent coffee ground extract was successfully incorporated into compact cast films, while tomato waste extract did not allow the formation of homogeneous cast films and required electrospinning to obtain uniform fibrous structures. The incorporation of spent coffee ground extract significantly increased surface wettability and film stiffness, with Young’s modulus reaching 695 MPa. In contrast, electrospun films containing tomato waste extract exhibited lower tensile strength due to their porous fibrous structure, although uniform fibers were obtained. These findings demonstrate that extract chemistry critically affects the suitability of the processing technique and provide useful guidelines for the design of sustainable zein-based active packaging systems derived from agri-food waste valorization.

Schlagwörter

Stichwörter der Autor:innen

active food packagingbio-based packagingdoctor blade-assisted castingelectrospinningnatural antioxidant extractnon-conventional extraction techniqueswaste valorization

Autor:innen und Institutionen

  • Department of Civil, Chemical and Environmental Engineering, University of Genoa, Via Opera Pia, 15, 16145 Genoa, Italy.

ORCID-Profile: Emanuela Drago, Alberto Lagazzo, Roberta Campardelli

Förderung

  • European Union

Zitieren

APA

Bufalini, C., Li, J., Drago, E., Lagazzo, A., & Campardelli, R. (2026). Processing-Dependent Incorporation of Food By-Product Extract into Zein-Based Active Packaging Films. Polymers, 18(11), 1347. https://doi.org/10.3390/polym18111347

Vancouver

Bufalini C, Li J, Drago E, Lagazzo A, Campardelli R. Processing-Dependent Incorporation of Food By-Product Extract into Zein-Based Active Packaging Films. Polymers. 2026;18(11):1347. doi:10.3390/polym18111347

BibTeX
@article{Bufalini2026,
  author = {Bufalini, Chiara and Li, Junyang and Drago, Emanuela and Lagazzo, Alberto and Campardelli, Roberta},
  title = {Processing-Dependent Incorporation of Food By-Product Extract into Zein-Based Active Packaging Films},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1347},
  doi = {10.3390/polym18111347}
}
Kostenlos starten →