EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effects of Processing Parameters on the Mechanical, Thermo-Mechanical and Creep-Recovery Properties of Unidirectional Carbon Fiber Reinforced Thermoplastic Polypropylene Composites

Shaoce Dong, Siwei Xie, Ping Zhou, Puxuan Zhang, Yutan Zhang, Bin Hong iD, Guijun Xian, Chenggao Li iD

Polymers · 28.05.2026 · 18 (11) · 1342

DOI: 10.3390/polym18111342 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 28.05.2026. Verfasst von Shaoce Dong und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Harbin Institute of Technology (HIT), 73 Huanghe Road, Nangang District, Harbin 150090, China. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Key Research and Development Program of China, Heilongjiang Natural Science Foundation, Heilongjiang Human Resources and Social Security Bureau and the Fundamental Research Funds for the Central Universities.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Processing parameters play a key role in the mechanical, thermo-mechanical and creep-recovery properties of unidirectional carbon fiber reinforced thermoplastic polypropylene (CF/PP) composites because of high matrix viscosity, which governs their impregnation and interfacial bonding. This study systematically investigates the effects of molding temperature (190~210 °C), pressure (1~3 MPa), and holding time (5~15 min) on its short beam strength (SBS), storage modulus, loss modulus, tan δ, creep strain, strain recovery, and crystallinity using a Taguchi experimental design. The results presented that processing parameters have a huge effect on CF/PP composites’ SBS, and through the experimental design, the SBS could be improved by 68.1% (21.3~35.8 MPa). Holding time is the most influential parameter for SBS and damping performance, while temperature and pressure interact strongly, highlighting the importance of parameter synergy. There was a strong negative correlation between the crystallinity degree and the SBS of CF/PP composites, and a higher crystallinity degree means a sharper and higher melting peak. Creep-recovery tests reveal near-complete recovery (87~102%) at 30 °C, which decreases to 71~79% at 80 °C due to increased matrix mobility. Finally, it was confirmed that the relatively low SBS of CF/PP composites comes from the void and incomplete matrix impregnation of fibers. The above results advance the design of high-performance, sustainable thermoplastic composites for civil and structural engineering applications.

Schlagwörter

Stichwörter der Autor:innen

carbon fibercreep-recovery behaviorcrystalline behaviormanufacturingmechanical propertiespolypropylenethermo-mechanical

Autor:innen und Institutionen

  • School of Civil Engineering, Harbin Institute of Technology (HIT), 73 Huanghe Road, Nangang District, Harbin 150090, China.
  • School of Civil Engineering, Lanzhou Jiaotong University, No. 88 West Anning Road, Anning District, Lanzhou 730070, China.
  • College of Future Technologies, Hohai University, Changzhou 213200, China.
  • Yangtze River Delta Carbon Fiber and Composite Innovation Center, Changzhou 213126, China.

ORCID-Profile: Bin Hong, Chenggao Li

Förderung

  • National Key Research and Development Program of China
  • Heilongjiang Natural Science Foundation
  • Heilongjiang Human Resources and Social Security Bureau and the Fundamental Research Funds for the Central Universities
  • Heilongjiang Natural Science Foundation and Fundamental Research Funds for the Central Universities
  • initial funding for post-doctoral in HIT
  • Chenggao Li

Zitieren

APA

Dong, S., Xie, S., Zhou, P., Zhang, P., Zhang, Y., Hong, B., Xian, G., & Li, C. (2026). Effects of Processing Parameters on the Mechanical, Thermo-Mechanical and Creep-Recovery Properties of Unidirectional Carbon Fiber Reinforced Thermoplastic Polypropylene Composites. Polymers, 18(11), 1342. https://doi.org/10.3390/polym18111342

Vancouver

Dong S, Xie S, Zhou P, Zhang P, Zhang Y, Hong B, et al. Effects of Processing Parameters on the Mechanical, Thermo-Mechanical and Creep-Recovery Properties of Unidirectional Carbon Fiber Reinforced Thermoplastic Polypropylene Composites. Polymers. 2026;18(11):1342. doi:10.3390/polym18111342

BibTeX
@article{Dong2026,
  author = {Dong, Shaoce and Xie, Siwei and Zhou, Ping and Zhang, Puxuan and Zhang, Yutan and Hong, Bin and Xian, Guijun and Li, Chenggao},
  title = {Effects of Processing Parameters on the Mechanical, Thermo-Mechanical and Creep-Recovery Properties of Unidirectional Carbon Fiber Reinforced Thermoplastic Polypropylene Composites},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1342},
  doi = {10.3390/polym18111342}
}
Kostenlos starten →