EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties of Carbon Fiber and Polyimide Fiber Hybrid Reinforced Polyimide Resin Matrix Composites at Room and High Temperatures

Ningqi Lu, Hongkun Gao, Yizhuo Gu iD, Hongtong Dou, Yibin Li

Polymers · 27.05.2026 · 18 (11) · 1322

DOI: 10.3390/polym18111322 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.05.2026. Verfasst von Ningqi Lu und 4 weiteren Autor:innen. Beteiligte Einrichtung: Tianmushan Laboratory, Hangzhou 310023, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: “Pioneer” and “Leading Goose” R&D Program of Zhejiang.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

High-strength, high-modulus polyimide (PI) fibers are a type of high-performance organic fiber known for their exceptional high-temperature resistance. When blended with carbon fibers to prepare hybrid composite materials, they have the potential to strike a balance between rigidity and toughness, thereby offering a composite structure with high modulus, strength and high toughness. In this study, a series of hybrid fiber-reinforced composites were fabricated using high-strength, high-modulus PI fibers together with carbon fibers as reinforcements and a PI resin matrix. The effects of the hybrid ratio on the tensile, compressive and flexural properties, as well as the failure modes, were systematically investigated. Experimental results showed that, compared to pure PI fiber composites, the hybrid fiber composites exhibited significant improvements in the compressive and flexural properties, in accordance with the hybrid law. Specifically, the hybrid composites demonstrated a negative hybrid effect in terms of tensile properties, whereas they exhibited a positive hybrid effect in terms of compressive and flexural properties. In high-temperature flexural tests, the addition of carbon fibers significantly enhanced the retention of the properties at 300 °C and 370 °C; for instance, the incorporation of carbon fibers at a volume fraction of 24% enhanced the flexural strength retention rate of the composite laminate at 300 °C from 37% to 66%, and remarkably increased the modulus retention rate from 50% to 94%, showing great advantages of the hybrid composite in a load-bearing structure at elevated temperatures.

Schlagwörter

Stichwörter der Autor:innen

PI fibercarbon fiberhigh-temperature resistancehybrid composite

Autor:innen und Institutionen

  • Tianmushan Laboratory, Hangzhou 310023, China.
  • School of Materials Science and Engineering, Beihang University, Beijing 100191, China.

ORCID-Profile: Yizhuo Gu

Förderung

  • “Pioneer” and “Leading Goose” R&D Program of Zhejiang

Zitieren

APA

Lu, N., Gao, H., Gu, Y., Dou, H., & Li, Y. (2026). Mechanical Properties of Carbon Fiber and Polyimide Fiber Hybrid Reinforced Polyimide Resin Matrix Composites at Room and High Temperatures. Polymers, 18(11), 1322. https://doi.org/10.3390/polym18111322

Vancouver

Lu N, Gao H, Gu Y, Dou H, Li Y. Mechanical Properties of Carbon Fiber and Polyimide Fiber Hybrid Reinforced Polyimide Resin Matrix Composites at Room and High Temperatures. Polymers. 2026;18(11):1322. doi:10.3390/polym18111322

BibTeX
@article{Lu2026,
  author = {Lu, Ningqi and Gao, Hongkun and Gu, Yizhuo and Dou, Hongtong and Li, Yibin},
  title = {Mechanical Properties of Carbon Fiber and Polyimide Fiber Hybrid Reinforced Polyimide Resin Matrix Composites at Room and High Temperatures},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1322},
  doi = {10.3390/polym18111322}
}
Kostenlos starten →