EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Characterization of Agar–Starch-Based Bioplastic Films

Alaa Alnatsheh, Birce Dikici iD, Rishikesh Srinivasaraghavan Govindarajan iD, Daewon Kim iD

Polymers · 27.05.2026 · 18 (11) · 1321

DOI: 10.3390/polym18111321 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 27.05.2026. Verfasst von Alaa Alnatsheh und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, Embry-Riddle Aeronautical University (ERAU), Daytona Beach, FL 32114, USA. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Embry-Riddle Aeronautical University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates agar–starch composite bioplastic films formulated with five agar-to-starch ratios (1:1, 2:1, 3:1, 4:1, and 5:1) to evaluate how composition influences material performance. Films were produced by solution casting with glycerol as a plasticizer and characterized through tensile testing (ASTM D882-18), DSC, TGA, FTIR, water absorption measurements, physical property assessment, and biodegradability tests including water, UV, and soil degradation. Mechanical results showed that the 3:1 formulation (A3S1) exhibited the highest tensile strength (2.78 MPa) with moderate elongation (57.25%), while the 1:1 formulation (A1S1) showed the greatest flexibility (76.38% elongation) but lower strength (2.07 MPa). Thermal analysis indicated improved thermal stability with increasing agar content, with onset degradation temperatures ranging from 42.89 °C to 51.84 °C and melting points from 99 °C to 108 °C. FTIR spectra showed no new major absorption bands, with only minor shifts in selected bands, indicating component interactions without evidence of new chemical bond formation. Films with higher starch content displayed increased thickness, weight per area, and water absorption. Overall, adjusting agar–starch ratios produced distinct combinations of mechanical, thermal, and physical properties, with the 3:1 ratio offering the best balance of strength and water resistance. All formulations showed measurable biodegradation under water, UV, and soil conditions, indicating environmental degradability.

Schlagwörter

Stichwörter der Autor:innen

FTIR characterizationagar–starch bioplasticsbio-based packagingbiopolymer compositesmechanical propertiessoil biodegradationthermal analysiswater absorption

Autor:innen und Institutionen

  • Department of Mechanical Engineering, Embry-Riddle Aeronautical University (ERAU), Daytona Beach, FL 32114, USA.
  • Department of Mechanical Engineering, Florida Polytechnic University, Lakeland, FL 33805, USA.
  • Department of Aerospace Engineering, Embry-Riddle Aeronautical University (ERAU), Daytona Beach, FL 32114, USA.

ORCID-Profile: Birce Dikici, Rishikesh Srinivasaraghavan Govindarajan, Daewon Kim

Förderung

  • Embry-Riddle Aeronautical University

Zitieren

APA

Alnatsheh, A., Dikici, B., Srinivasaraghavan Govindarajan, R., & Kim, D. (2026). Development and Characterization of Agar–Starch-Based Bioplastic Films. Polymers, 18(11), 1321. https://doi.org/10.3390/polym18111321

Vancouver

Alnatsheh A, Dikici B, Srinivasaraghavan Govindarajan R, Kim D. Development and Characterization of Agar–Starch-Based Bioplastic Films. Polymers. 2026;18(11):1321. doi:10.3390/polym18111321

BibTeX
@article{Alnatsheh2026,
  author = {Alnatsheh, Alaa and Dikici, Birce and Srinivasaraghavan Govindarajan, Rishikesh and Kim, Daewon},
  title = {Development and Characterization of Agar–Starch-Based Bioplastic Films},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1321},
  doi = {10.3390/polym18111321}
}
Kostenlos starten →