EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Warpage of Injection-Moulded Thin Plates: Numerical Evaluation of Simulation Strategies and Experimental Validation

Tomaž Kastelic, Nikolaj Mole iD, Gašper Cafuta, Bojan Starman iD, Miroslav Halilovič iD

Polymers · 26.05.2026 · 18 (11) · 1310

DOI: 10.3390/polym18111310 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.05.2026. Verfasst von Tomaž Kastelic und 4 weiteren Autor:innen. Beteiligte Einrichtung: Cafuta d.o.o., Kalce 5j, SI-1370 Logatec, Slovenia. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents an experimental and numerical investigation of warpage in injection-moulded ABS plates, with emphasis on the influence of modelling assumptions and residual stress development on warpage prediction. Two sets of processing conditions with different mould-temperature balances were investigated experimentally, and warpage was measured using a coordinate measuring machine (CMM). Filling and packing were simulated using Moldex3D, while warpage was predicted using two integrated Moldex3D solvers and a coupled Moldex3D–Abaqus thermomechanical approach. Although identical thermal input data were used, the three approaches produced noticeably different warpage predictions. The Moldex3D enhanced solver consistently over-predicted warpage magnitude, while the Moldex3D nonlinear solver captured the nonlinear effects but showed unrealistic localised deformation. The thermomechanical approach predicted the warpage shape more accurately for both parameter sets and showed the closest overall agreement with the experimental results.

Schlagwörter

Stichwörter der Autor:innen

AbaqusMoldex3Dinjection mouldingmodelling assumptionsresidual stressesthermomechanical simulationwarpage

Autor:innen und Institutionen

  • Cafuta d.o.o., Kalce 5j, SI-1370 Logatec, Slovenia.
  • Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, SI-1000 Ljubljana, Slovenia.

ORCID-Profile: Nikolaj Mole, Bojan Starman, Miroslav Halilovič

Zitieren

APA

Kastelic, T., Mole, N., Cafuta, G., Starman, B., & Halilovič, M. (2026). Warpage of Injection-Moulded Thin Plates: Numerical Evaluation of Simulation Strategies and Experimental Validation. Polymers, 18(11), 1310. https://doi.org/10.3390/polym18111310

Vancouver

Kastelic T, Mole N, Cafuta G, Starman B, Halilovič M. Warpage of Injection-Moulded Thin Plates: Numerical Evaluation of Simulation Strategies and Experimental Validation. Polymers. 2026;18(11):1310. doi:10.3390/polym18111310

BibTeX
@article{Kastelic2026,
  author = {Kastelic, Tomaž and Mole, Nikolaj and Cafuta, Gašper and Starman, Bojan and Halilovič, Miroslav},
  title = {Warpage of Injection-Moulded Thin Plates: Numerical Evaluation of Simulation Strategies and Experimental Validation},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1310},
  doi = {10.3390/polym18111310}
}
Kostenlos starten →