EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development and Performance Evaluation of Residue-Reinforced Recycled HDPE and Bio-Based PP Packaging via Blow Extrusion

Bruna Basto, Bárbara Freitas, Fernando Leite iD, João Bessa iD, Gonçalo Oliveira iD, Ricardo Neto, Raul Fangueiro iD

Polymers · 26.05.2026 · 18 (11) · 1307

DOI: 10.3390/polym18111307 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.05.2026. Verfasst von Bruna Basto und 6 weiteren Autor:innen. Beteiligte Einrichtung: Fibrenamics-Institute for Innovation in Fibrous and Composite Materials, 4800-058 Guimarães, Portugal. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Portugal 2030, Portugal 2030 Program.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the development and performance of polyolefin-based packaging materials reinforced with industrial mineral residues, specifically slate powder (SP) and bivalve shell powder (BSP). High-density polyethylene (HDPE) and polypropylene (PP) matrices were compounded with these fillers and processed by extrusion blow moulding to produce final prototypes. Thermal analyses (TGA and DSC) showed that incorporating SP and BSP does not compromise the thermal stability of the polymer matrices and increases stiffness in the filled formulations. Accelerated ageing (QUV, 200 h) revealed distinct photo-oxidative behaviours. PP and PP + BSP (30%) exhibited increased fragility and moderate colour changes, whereas PP + SP (10%) retained flexibility, indicating a partial protective effect of SP. HDPE-based formulations showed higher intrinsic UV resistance, with HDPE + BSP (30%) displaying excellent colour stability. Tensile tests before and after QUV exposure confirmed that fillers increase stiffness with limited influence on tensile strength. Air permeability results indicated that neat PP and HDPE were below the detection limit. At the same time, filled formulations exhibited measurable permeability, suggesting that filler incorporation may influence gas transport through interfacial effects. Overall, the results show that SP and BSP act as reinforcing additives and can modify functional properties such as stiffness and ageing resistance. However, their influence on barrier performance depends on the formulation and permeation mechanism.

Schlagwörter

Stichwörter der Autor:innen

barrier propertiesbivalve shell powder (BSP)blow mouldingcompoundingmechanical reinforcementmineral fillersphoto-oxidative degradationpolyolefin compositesslate powder (SP)

Autor:innen und Institutionen

  • Fibrenamics-Institute for Innovation in Fibrous and Composite Materials, 4800-058 Guimarães, Portugal.
  • B4Logic, Rua Principal N° 172, Edifício Prisma, 1°D, Ponte de Vagos, 3840-326 Vagos, Portugal.
  • MPlastic, Rua Principal N° 172, Edifício Prisma, Sala D, Ponte de Vagos, 3840-326 Vagos, Portugal.
  • Department of Textile Engineering, University of Minho, 4800-058 Guimarães, Portugal.

ORCID-Profile: Fernando Leite, João Bessa, Gonçalo Oliveira, Raul Fangueiro

Förderung

  • Portugal 2030
  • Portugal 2030 Program

Zitieren

APA

Basto, B., Freitas, B., Leite, F., Bessa, J., Oliveira, G., Neto, R., & Fangueiro, R. (2026). Development and Performance Evaluation of Residue-Reinforced Recycled HDPE and Bio-Based PP Packaging via Blow Extrusion. Polymers, 18(11), 1307. https://doi.org/10.3390/polym18111307

Vancouver

Basto B, Freitas B, Leite F, Bessa J, Oliveira G, Neto R, et al. Development and Performance Evaluation of Residue-Reinforced Recycled HDPE and Bio-Based PP Packaging via Blow Extrusion. Polymers. 2026;18(11):1307. doi:10.3390/polym18111307

BibTeX
@article{Basto2026,
  author = {Basto, Bruna and Freitas, Bárbara and Leite, Fernando and Bessa, João and Oliveira, Gonçalo and Neto, Ricardo and Fangueiro, Raul},
  title = {Development and Performance Evaluation of Residue-Reinforced Recycled HDPE and Bio-Based PP Packaging via Blow Extrusion},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1307},
  doi = {10.3390/polym18111307}
}
Kostenlos starten →