EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Temperature on the Mechanical Behavior of Lead/Rubber Bearings

Fan Yang, Lixiu Zhang, Hui Pang, Tao Jiang

Polymers · 26.05.2026 · 18 (11) · 1306

DOI: 10.3390/polym18111306 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 26.05.2026. Verfasst von Fan Yang und 3 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering & Transportation, Bei Hua University, Jilin 132013, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 47 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jilin Province Science and Technology Department, Department of Education of Jilin Province, Science and Technology Development Program of Jilin Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical behavior of lead/rubber bearings (LRBs) is strongly influenced by both ambient temperature and hysteretic heating under seismic loading; however, their coupled effects and underlying mechanisms remain insufficiently understood. This study presents a systematic investigation of the thermo-mechanical response of LRBs through combined experimental and numerical approaches. Dynamic cyclic tests were conducted on full-scale LRBs (700 mm in diameter) over a wide range of ambient temperatures, revealing that ambient temperature and hysteretic heating jointly govern the evolution of key mechanical properties, including stiffness, characteristic strength, and energy dissipation capacity. Specifically, decreasing temperature leads to stiffness and strength enhancement, whereas hysteretic heating induced by cyclic plastic deformation of the lead core results in progressive softening and degradation of restoring force. Based on the experimental observations, a modified uniaxial Bouc–Wen constitutive model is developed, incorporating the coupled effects of ambient temperature, hysteretic heating, and large-strain hardening. The proposed model is implemented in a single-degree-of-freedom (SDOF) base-isolated system to evaluate the seismic response under different temperature conditions. The results reveal a competing mechanism between ambient temperature and hysteretic heating: low temperatures tend to increase base shear and reduce displacement, while hysteretic heating produces the opposite effect, with their relative dominance depending on temperature level and ground motion intensity. Neglecting such thermo-mechanical coupling may lead to significant misestimation of structural response, particularly under long-duration strong ground motions. This study provides new insights into the coupled temperature-dependent behavior of LRBs and establishes a robust modeling framework for the seismic analysis and design of isolation systems under complex service conditions.

Schlagwörter

Stichwörter der Autor:innen

ambient temperatureconstitutive modelhysteretic heatinglead/rubber bearingseismic response

Autor:innen und Institutionen

  • School of Civil Engineering & Transportation, Bei Hua University, Jilin 132013, China.
  • CCCC Second Harbour Engineering Jilin Construction Co., Ltd., Changchun 130000, China.
  • Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics, China Earthquake Administration, Harbin 150080, China.
  • Key Laboratory of Earthquake Disaster Mitigation, Ministry of Emergency Management, Harbin 150080, China.

Förderung

  • Jilin Province Science and Technology Department
  • Department of Education of Jilin Province
  • Science and Technology Development Program of Jilin Province
  • Education Department of Jilin Province

Zitieren

APA

Yang, F., Zhang, L., Pang, H., & Jiang, T. (2026). Influence of Temperature on the Mechanical Behavior of Lead/Rubber Bearings. Polymers, 18(11), 1306. https://doi.org/10.3390/polym18111306

Vancouver

Yang F, Zhang L, Pang H, Jiang T. Influence of Temperature on the Mechanical Behavior of Lead/Rubber Bearings. Polymers. 2026;18(11):1306. doi:10.3390/polym18111306

BibTeX
@article{Yang2026,
  author = {Yang, Fan and Zhang, Lixiu and Pang, Hui and Jiang, Tao},
  title = {Influence of Temperature on the Mechanical Behavior of Lead/Rubber Bearings},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1306},
  doi = {10.3390/polym18111306}
}
Kostenlos starten →