Dual-Layer PDMS/Polysulfone Composite Membranes Incorporating Cu-MOF-74 for Enhanced CO2 Capture Performance
Polymers · 26.05.2026 · 18 (11) · 1303
DOI: 10.3390/polym18111303 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 26.05.2026. Verfasst von Shoaib Ahsan und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Chemical and Materials Engineering (SCME), National University of Sciences and Technology (NUST), Sector H-12, Islamabad 44000, Pakistan. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Polymeric membranes are widely investigated for CO2 separation; however, their performance is often limited by the permeability–selectivity trade-off. Incorporating metal–organic frameworks (MOFs) and designing composite membrane architectures are promising strategies to overcome these limitations. This study aims to evaluate the effect of incorporating MOF-74 (Cu and Ni variants) into a polydimethylsiloxane (PDMS) selective layer supported on a polysulfone (PSF) membrane for enhanced CO2/N2 separation performance. Dual-layer PDMS/PSF composite membranes were fabricated via phase inversion for the PSF support, followed by solution casting of the PDMS/MOF layer. The developed membrane architecture introduces a synergistic design that combines the mechanical robustness of PSF with the selective transport capability of PDMS and the strong CO2 affinity of MOF-74, offering an effective strategy for improving gas separation efficiency. Gas permeation performance was assessed using single-gas CO2 and N2 measurements at feed pressures of 2–5 bar. The incorporation of MOF-74 improved CO2 transport properties, with the 1 wt.% Cu-MOF-74 composite membrane achieving a CO2 permeance of 912.5 GPU and a CO2/N2 ideal selectivity of 94.75. The dual-layer configuration significantly enhanced permeance compared with unsupported mixed-matrix membranes while maintaining selectivity. Additionally, the composite membranes exhibited improved mechanical strength due to the PSF support layer. The findings demonstrate that dual-layer PDMS/PSF composite membranes incorporating MOF-74 provide a promising proof-of-concept approach for improving CO2 separation performance. Further studies involving mixed-gas testing and long-term stability are required to assess their practical applicability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Chemical and Materials Engineering (SCME), National University of Sciences and Technology (NUST), Sector H-12, Islamabad 44000, Pakistan.
ORCID-Profile: Muhammad Ahsan, Sarah Farrukh
Zitieren
APA
Ahsan, S., Ahsan, M., Noor, T., Farrukh, S., & Ali, S. (2026). Dual-Layer PDMS/Polysulfone Composite Membranes Incorporating Cu-MOF-74 for Enhanced CO2 Capture Performance. Polymers, 18(11), 1303. https://doi.org/10.3390/polym18111303
Vancouver
Ahsan S, Ahsan M, Noor T, Farrukh S, Ali S. Dual-Layer PDMS/Polysulfone Composite Membranes Incorporating Cu-MOF-74 for Enhanced CO2 Capture Performance. Polymers. 2026;18(11):1303. doi:10.3390/polym18111303
BibTeX
@article{Ahsan2026,
author = {Ahsan, Shoaib and Ahsan, Muhammad and Noor, Tayyaba and Farrukh, Sarah and Ali, Subhan},
title = {Dual-Layer PDMS/Polysulfone Composite Membranes Incorporating Cu-MOF-74 for Enhanced CO2 Capture Performance},
journal = {Polymers},
year = {2026},
volume = {18},
number = {11},
pages = {1303},
doi = {10.3390/polym18111303}
}
EUVIMED