EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Boron Nitride-Modified Hemp Nanofiber Reinforced Slag-Based Geopolymer Composites: Mechanical, Microstructural and Fire Resistance Performance

Ahmet Filazi iD, İsmail Melih Tezcan iD, Reyhan Akat, Deniz Doğan, Ümit Erdem

Polymers · 24.05.2026 · 18 (11) · 1288

DOI: 10.3390/polym18111288 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 24.05.2026. Verfasst von Ahmet Filazi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Construction, Kırıkkale Vocational School, Kırıkkale University, Kırıkkale 71450, Turkey. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Türkiye Bilimsel ve Teknolojik Araştırma Kurumu, Scientific and Technological Research Council of Türkiye, Yozgat Bozok University Scientific Research Projects Coordination Unit.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the mechanical performance, high-temperature resistance, and microstructural characteristics of ground granulated blast furnace slag (GGBFS)-based geopolymer composites reinforced with boron nitride (BN)-modified hemp nanofibers. BN-modified hemp nanofibers (PVA-mBN/Hemp) were produced via electrospinning and incorporated into geopolymer mixtures at varying ratios ranging from 0 to 4 wt%. The effects of nanofiber content on composite properties were evaluated through mechanical testing, ultrasonic pulse velocity (UPV) measurements, and exposure to elevated temperatures (300–1200 °C), supported by SEM-EDS, FTIR, and XRD analyses. The results indicate that low nanofiber additions (0.5–1 wt%) improve flexural strength by up to 15%, although compressive strength is slightly reduced due to increased porosity. UPV measurements confirm the changes in internal structure. At elevated temperatures, nanofiber-reinforced samples exhibit enhanced residual strength compared to the control specimens, particularly at moderate temperatures, whereas significant degradation occurs above 900 °C. Microstructural analyses reveal improved fiber-matrix interaction, reduced crack propagation, and enhanced thermal stability attributed to BN modification. Overall, the incorporation of 0.5–1 wt% BN-modified hemp nanofibers provides an effective balance between mechanical performance and high-temperature resistance, highlighting their potential for use in sustainable and fire-resistant construction materials. This study contributes to the United Nations Sustainable Development Goals (SDGs), particularly SDG 9 (Industry, Innovation, and Infrastructure), SDG 11 (Sustainable Cities and Communities), and SDG 12 (Responsible Consumption and Production).

Schlagwörter

Stichwörter der Autor:innen

GGBFSSDG 11SDG 12SDG 9boron nitrideelectrospinningfire resistancegeopolymerhemp fibernanocompositesustainable material

Autor:innen und Institutionen

  • Department of Construction, Kırıkkale Vocational School, Kırıkkale University, Kırıkkale 71450, Turkey.
  • Department of Civil Engineering Graduate Student, Institute of Science, Kırıkkale University, Kırıkkale 71450, Turkey.
  • Department of Architecture, Faculty of Engineering and Architecture, Yozgat Bozok University, Yozgat 66900, Turkey.
  • Faculty of Engineering and Natural Sciences, Kırıkkale University, Kırıkkale 71450, Türkiye.
  • Department of Electronics and Automation, Kırıkkale Vocational School, Kırıkkale University, Kırıkkale 71450, Turkey.

ORCID-Profile: Ahmet Filazi, İsmail Melih Tezcan

Förderung

  • Türkiye Bilimsel ve Teknolojik Araştırma Kurumu
  • Scientific and Technological Research Council of Türkiye
  • Yozgat Bozok University Scientific Research Projects Coordination Unit

Zitieren

APA

Filazi, A., Tezcan, İ. M., Akat, R., Doğan, D., & Erdem, Ü. (2026). Boron Nitride-Modified Hemp Nanofiber Reinforced Slag-Based Geopolymer Composites: Mechanical, Microstructural and Fire Resistance Performance. Polymers, 18(11), 1288. https://doi.org/10.3390/polym18111288

Vancouver

Filazi A, Tezcan İM, Akat R, Doğan D, Erdem Ü. Boron Nitride-Modified Hemp Nanofiber Reinforced Slag-Based Geopolymer Composites: Mechanical, Microstructural and Fire Resistance Performance. Polymers. 2026;18(11):1288. doi:10.3390/polym18111288

BibTeX
@article{Filazi2026,
  author = {Filazi, Ahmet and Tezcan, İsmail Melih and Akat, Reyhan and Doğan, Deniz and Erdem, Ümit},
  title = {Boron Nitride-Modified Hemp Nanofiber Reinforced Slag-Based Geopolymer Composites: Mechanical, Microstructural and Fire Resistance Performance},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1288},
  doi = {10.3390/polym18111288}
}
Kostenlos starten →