EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sound Absorption Performance of Biobased Miura-Ori Origami Panel Absorbers Made from Impermeable Paper Membrane

Luka Čurović iD, Anže Železnik iD, Andrej Hvastja iD, Jonas Trojer iD, Miha Brojan iD, Jurij Prezelj iD

Polymers · 24.05.2026 · 18 (11) · 1287

DOI: 10.3390/polym18111287 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 24.05.2026. Verfasst von Luka Čurović und 5 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, 1000 Ljubljana, Slovenia. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: The Slovenian Research and Innovation Agency.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examines the potential of sustainable, biobased paper-based structures as panel/membrane sound absorbers. Although intact paper is naturally impermeable and a poor sound absorber, transforming it into complex three-dimensional origami geometries, specifically the Miura-ori pattern, could produce effective panel/membrane absorbers. Three distinct Miura-ori samples (A, B, and C) were fabricated with increasing geometric complexity, ranging from a simple triangular prism to a complex labyrinthine waveguide. The random incidence sound absorption coefficients of these samples were measured in a validated small-scale reverberation room. The underlying absorption mechanisms were further investigated through modal analysis and non-contact vibration velocity measurements. The results indicate that increased geometric complexity enhances acoustic performance. Sample C, the most complex structure, demonstrated the most consistent broadband absorption. The analysis confirmed a significant positive correlation between acoustic pressure modes, surface vibration velocity, and sound absorption peaks, indicating that acoustic energy dissipation is driven by the vibrational response of the paper membrane coupled with resonant modes in the air gap. This research demonstrates that tunable origami folding techniques using intact paper can be used to design lightweight acoustic treatments for diffuse sound fields in the mid-frequency range.

Schlagwörter

Stichwörter der Autor:innen

Miura-ori structurebiobased materialorigami-based lightweight panelrandom incidence sound absorption coeffcientsound absorption

Autor:innen und Institutionen

  • Faculty of Mechanical Engineering, University of Ljubljana, Aškerčeva 6, 1000 Ljubljana, Slovenia.

ORCID-Profile: Luka Čurović, Anže Železnik, Andrej Hvastja, Jonas Trojer, Miha Brojan, Jurij Prezelj

Förderung

  • The Slovenian Research and Innovation Agency

Zitieren

APA

Čurović, L., Železnik, A., Hvastja, A., Trojer, J., Brojan, M., & Prezelj, J. (2026). Sound Absorption Performance of Biobased Miura-Ori Origami Panel Absorbers Made from Impermeable Paper Membrane. Polymers, 18(11), 1287. https://doi.org/10.3390/polym18111287

Vancouver

Čurović L, Železnik A, Hvastja A, Trojer J, Brojan M, Prezelj J. Sound Absorption Performance of Biobased Miura-Ori Origami Panel Absorbers Made from Impermeable Paper Membrane. Polymers. 2026;18(11):1287. doi:10.3390/polym18111287

BibTeX
@article{urovi2026,
  author = {Čurović, Luka and Železnik, Anže and Hvastja, Andrej and Trojer, Jonas and Brojan, Miha and Prezelj, Jurij},
  title = {Sound Absorption Performance of Biobased Miura-Ori Origami Panel Absorbers Made from Impermeable Paper Membrane},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {11},
  pages = {1287},
  doi = {10.3390/polym18111287}
}
Kostenlos starten →