EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mold Surface Optimization and Process Parameter Investigation for Preforming in Advanced Pultrusion of Composite Structures

Mengting Sun, Zongsu Zhang, Feng Liu, Qigang Han

Polymers · 20.05.2026 · 18 (10) · 1244

DOI: 10.3390/polym18101244 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 20.05.2026. Verfasst von Mengting Sun und 3 weiteren Autor:innen. Beteiligte Einrichtung: Key Laboratory of Automobile Materials, Ministry of Education, School of Materials Science and Engineering, Jilin University, Changchun 130022, China. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Advanced pultrusion technology for composite materials is an automated forming process that uses pre-impregnated materials as raw materials and is oriented towards the manufacturing of continuous components. It is particularly suitable for the continuous manufacturing of ultra-long components with uniform cross-sections and has a promising application prospect in the field of aviation composite materials. However, during the preforming stage, the pre-impregnated materials are prone to strain concentration and uneven thickness under the constraint of the mold surface, and in severe cases, there is a tendency to form wrinkles. Moreover, the severity of these defects is further influenced by the process parameters. In response to the above problems, this paper proposes a mold surface optimization method based on the finite element model with the goal of three-dimensional strain homogenization, which controls the thickness direction and in-plane strain within 5%, effectively improving the material deformation coordination. Furthermore, the influence law of preforming temperature, traction speed and tension on preforming quality was systematically analyzed through experimental research. It was found that the influence of each process parameter on appearance quality, thickness uniformity and internal quality all showed a trend of “improvement first and then deterioration”, thus obtaining a relatively better combination of process parameters for preforming quality. The results of this study provide methodological and technical support for the research on advanced pultrusion preforming processes of complex cross-section components.

Schlagwörter

Stichwörter der Autor:innen

advanced pultrusioncomposite materialsmold surface optimizationpreforming processprocess parameters

Autor:innen und Institutionen

  • Key Laboratory of Automobile Materials, Ministry of Education, School of Materials Science and Engineering, Jilin University, Changchun 130022, China.
  • State Key Laboratory of Advanced Forming Technology and Equipment, China Academy of Machinery Science and Technology, China Academy of Machinery Science and Technology Group Co., Ltd., Beijing 100044, China.
  • Institute of Structured and Architected Materials, Liaoning Academy of Materials, Shenyang 110167, China.
  • Weihai Institute for Bionics, Jilin University, Weihai 264207, China.

Zitieren

APA

Sun, M., Zhang, Z., Liu, F., & Han, Q. (2026). Mold Surface Optimization and Process Parameter Investigation for Preforming in Advanced Pultrusion of Composite Structures. Polymers, 18(10), 1244. https://doi.org/10.3390/polym18101244

Vancouver

Sun M, Zhang Z, Liu F, Han Q. Mold Surface Optimization and Process Parameter Investigation for Preforming in Advanced Pultrusion of Composite Structures. Polymers. 2026;18(10):1244. doi:10.3390/polym18101244

BibTeX
@article{Sun2026,
  author = {Sun, Mengting and Zhang, Zongsu and Liu, Feng and Han, Qigang},
  title = {Mold Surface Optimization and Process Parameter Investigation for Preforming in Advanced Pultrusion of Composite Structures},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {10},
  pages = {1244},
  doi = {10.3390/polym18101244}
}
Kostenlos starten →