EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Osteoinductive and Biocompatibility Assessment of a 3D-Printed Polymeric–Hydroxyapatite Composite Interference Screw

Rana Smaida iD, Louis-Paul Maugard iD, Hervé Gegout, Manuel Arruebo iD, Florence Fioretti iD, Nadia Benkirane-Jessel, Henri Favreau

Polymers · 19.05.2026 · 18 (10) · 1239

DOI: 10.3390/polym18101239 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.05.2026. Verfasst von Rana Smaida und 6 weiteren Autor:innen. Beteiligte Einrichtung: Institut National de la Santé et de la Recherche Médicale (INSERM) UMR1260, Nanomédicine Régénérative, 1 Rue Eugène Boeckel, 67000 Strasbourg, France. Die Arbeit nennt 121 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Eurométropole of Strasbourg, GEBOAS, Faculty of Medicine, Strasbourg Eurométropole.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Anterior cruciate ligament reconstruction relies on interference screw fixation, yet insufficient graft osseointegration remains a critical clinical challenge. This study aimed to develop and characterize a 3D-printed polymeric–hydroxyapatite composite interference screw with an osteoinductive surface to enhance localized osteogenic responses. Screws were designed, modeled, and fabricated using fused deposition modeling 3D printing with a polycaprolactone-poly(lactic-co-glycolic acid)-hydroxyapatite composite. Physico-chemical characterization was performed using scanning electron microscopy. Biocompatibility was assessed through mesenchymal stem cell metabolic activity assays and morphological analysis. Osteogenic gene expression was quantified by RT-qPCR following culture in osteogenic differentiation medium. In vivo osseointegration was evaluated histologically at five and nine weeks following implantation in the proximal tibial epiphysis of a rat model. 3D printing successfully produced screws with consistent geometry and surface characteristics. The composite material supported robust mesenchymal stem cell proliferation without cytotoxicity or morphological abnormalities. Histological examination revealed progressive bone formation with no adverse tissue reactions, including the absence of cyst formation, osteolysis, or excessive fibrosis. RT-qPCR revealed upregulation of osteogenic markers in those enhanced screws. These results indicate that the 3D-printed polymeric–hydroxyapatite composite screws are biocompatible and capable of stimulating localized osteogenic activity, supporting their potential as a biological foundation for future evaluation in anterior cruciate ligament reconstruction applications.

Schlagwörter

Stichwörter der Autor:innen

3D printingbiocompatibilityinterference screwosteoinductionpolymer-hydroxyapatite compositepreclinical modeltendon graft fixation

Autor:innen und Institutionen

  • Institut National de la Santé et de la Recherche Médicale (INSERM) UMR1260, Nanomédicine Régénérative, 1 Rue Eugène Boeckel, 67000 Strasbourg, France.
  • Faculté de Pharmacie, Faculté de Chirurgie Dentaire, Faculté de Médecine, Université de Strasbourg, 4 Rue Blaise Pascal, 67000 Strasbourg, France.
  • Instituto de Nanociencia y Materiales de Aragón (INMA), CSIC-Universidad de Zaragoza, 50009 Zaragoza, Spain.
  • Department of Chemical Engineering, University of Zaragoza, Campus Río Ebro-Edificio I + D, C/Poeta Mariano Esquillor S/N, 50018 Zaragoza, Spain.

ORCID-Profile: Rana Smaida, Louis-Paul Maugard, Manuel Arruebo, Florence Fioretti

Förderung

  • Eurométropole of Strasbourg
  • GEBOAS, Faculty of Medicine
  • Strasbourg Eurométropole
  • Région Grand-Est, MTI-DMI project

Zitieren

APA

Smaida, R., Maugard, L. P., Gegout, H., Arruebo, M., Fioretti, F., Benkirane-Jessel, N., & Favreau, H. (2026). Osteoinductive and Biocompatibility Assessment of a 3D-Printed Polymeric–Hydroxyapatite Composite Interference Screw. Polymers, 18(10), 1239. https://doi.org/10.3390/polym18101239

Vancouver

Smaida R, Maugard LP, Gegout H, Arruebo M, Fioretti F, Benkirane-Jessel N, et al. Osteoinductive and Biocompatibility Assessment of a 3D-Printed Polymeric–Hydroxyapatite Composite Interference Screw. Polymers. 2026;18(10):1239. doi:10.3390/polym18101239

BibTeX
@article{Smaida2026,
  author = {Smaida, Rana and Maugard, Louis-Paul and Gegout, Hervé and Arruebo, Manuel and Fioretti, Florence and Benkirane-Jessel, Nadia and Favreau, Henri},
  title = {Osteoinductive and Biocompatibility Assessment of a 3D-Printed Polymeric–Hydroxyapatite Composite Interference Screw},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {10},
  pages = {1239},
  doi = {10.3390/polym18101239}
}
Kostenlos starten →