EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical and Structural Performance of Bio-Resin Composites Reinforced with Biopolymer Nonwoven Fabrics

Anna Sowińska-Baranowska iD, Marcin Masłowski iD, Justyna Miedzianowska-Masłowska, Magdalena Maciejewska iD, Dainius Martuzevičius, Tadas Prasauskas iD, Goda Masione

Polymers · 16.05.2026 · 18 (10) · 1215

DOI: 10.3390/polym18101215 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.05.2026. Verfasst von Anna Sowińska-Baranowska und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Institute of Polymer and Dye Technology, Lodz University of Technology, Stefanowskiego Street 16, 90-537 Lodz, Poland. Die Arbeit nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the mechanical, structural, and thermal performance of bio-based composite laminates reinforced with nonwoven fibrous materials derived from polylactic acid (PLA), poly(butylene succinate) (PBS), and polyamide 1010 (PA1010). The fibrous reinforcements, produced using melt-blown and electrospinning techniques, were characterized in terms of morphology, fibre diameter distribution, and wettability, and subsequently incorporated into bio-resin laminates to strengthen them. The curing behaviour of the composites was evaluated using differential scanning calorimetry (DSC). The results demonstrate that fibre structure and morphology strongly influence resin impregnation and interfacial interactions. Mechanical properties varied significantly depending on the reinforcement type. PA1010-based laminates exhibited the highest strength and stiffness due to their compact and uniform fibrous structure. PBS-based systems showed intermediate behaviour, while PLA-based composites displayed lower strength but higher deformability. DSC results indicated that fibre type affected crosslinking efficiency. Thermogravimetric analysis (TGA) revealed similar initial thermal stability of laminates (T5% ≈ 299–313 °C), governed by the resin matrix, while differences at higher temperatures reflected the type of reinforcement used. These findings highlight the importance of fibre morphology and interfacial compatibility in designing sustainable composite laminates reinforced with recycled fibrous materials.

Schlagwörter

Stichwörter der Autor:innen

PA1010PBSPLAbio-based resinsbiocompositeselectrospinninginterfacial adhesionmechanical propertiesmelt-blownnonwoven fabrics

Autor:innen und Institutionen

  • Department of Chemistry, Institute of Polymer and Dye Technology, Lodz University of Technology, Stefanowskiego Street 16, 90-537 Lodz, Poland.
  • Faculty of Chemical Technology, Kaunas University of Technology, Radvilenų pl. 19 C, 50254 Kaunas, Lithuania.

ORCID-Profile: Anna Sowińska-Baranowska, Marcin Masłowski, Magdalena Maciejewska, Tadas Prasauskas

Zitieren

APA

Sowińska-Baranowska, A., Masłowski, M., Miedzianowska-Masłowska, J., Maciejewska, M., Martuzevičius, D., Prasauskas, T., & Masione, G. (2026). Mechanical and Structural Performance of Bio-Resin Composites Reinforced with Biopolymer Nonwoven Fabrics. Polymers, 18(10), 1215. https://doi.org/10.3390/polym18101215

Vancouver

Sowińska-Baranowska A, Masłowski M, Miedzianowska-Masłowska J, Maciejewska M, Martuzevičius D, Prasauskas T, et al. Mechanical and Structural Performance of Bio-Resin Composites Reinforced with Biopolymer Nonwoven Fabrics. Polymers. 2026;18(10):1215. doi:10.3390/polym18101215

BibTeX
@article{SowiskaBaranowska2026,
  author = {Sowińska-Baranowska, Anna and Masłowski, Marcin and Miedzianowska-Masłowska, Justyna and Maciejewska, Magdalena and Martuzevičius, Dainius and Prasauskas, Tadas and Masione, Goda},
  title = {Mechanical and Structural Performance of Bio-Resin Composites Reinforced with Biopolymer Nonwoven Fabrics},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {10},
  pages = {1215},
  doi = {10.3390/polym18101215}
}
Kostenlos starten →