Incorporation of Fully Bio-Based Butylene Succinate Oligomers into Poly(butylene succinate) by Melt Mixing
Polymers · 13.05.2026 · 18 (10) · 1190
DOI: 10.3390/polym18101190 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 13.05.2026. Verfasst von Carmen Olivas Alonso und 2 weiteren Autor:innen. Beteiligte Einrichtung: University Institute of Food Engineering-FoodUPV, Universitat Politècnica de València (UPV), Camino de Vera s/n, 46022 Valencia, Spain. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 56 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish Ministry of Science and Innovation, Generalitat Valenciana.
Abstract (Originalsprache)
In this study, fully bio-based oligomers of butylene succinate (OBS) with different molecular weights (low: L-OBS, medium: M-OBS and high: H-OBS) were incorporated into poly(butylene succinate) (PBS) by melt mixing at varying loadings of 5–15 wt%. Then, PBS/OBS films were obtained by thermo-compression and characterized to assess their suitability for sustainable food packaging. Thus, OBS were homogeneously incorporated into PBS matrix and modulated the thermal, mechanical, and barrier properties of the PBS. L-OBS (Mn = 1150 g·mol−1) plasticized the amorphous PBS, depending on its concentration, more effectively than M-OBS (Mn: 8700 g·mol−1) and H-OBS (Mn: 18,650 g·mol−1), as deduced from the thermo-mechanical analysis. In every case, OBS enhanced crystallinity, mainly L-OBS, which reduced the film strength and increased water vapor permeability, depending on its concentration. In contrast, H-OBS improved mechanical strength, stiffness, and barrier performance. In all cases, X-ray diffraction confirmed the preservation of the PBS’s monoclinic crystalline structure but slightly shifted the diffraction angle depending on the ratio of the end-chain groups in the blend, thus reflecting the contribution of OBS in the crystalline lattice. Finally, oligomer incorporation resulted in an overall migration increase in different food simulants, impairing their application in packaging.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- University Institute of Food Engineering-FoodUPV, Universitat Politècnica de València (UPV), Camino de Vera s/n, 46022 Valencia, Spain.
ORCID-Profile: Carmen Olivas Alonso, Amparo Chiralt, Sergio Torres-Giner
Förderung
- Spanish Ministry of Science and Innovation
- Generalitat Valenciana
Zitieren
APA
Olivas Alonso, C., Chiralt, A., & Torres-Giner, S. (2026). Incorporation of Fully Bio-Based Butylene Succinate Oligomers into Poly(butylene succinate) by Melt Mixing. Polymers, 18(10), 1190. https://doi.org/10.3390/polym18101190
Vancouver
Olivas Alonso C, Chiralt A, Torres-Giner S. Incorporation of Fully Bio-Based Butylene Succinate Oligomers into Poly(butylene succinate) by Melt Mixing. Polymers. 2026;18(10):1190. doi:10.3390/polym18101190
BibTeX
@article{OlivasAlonso2026,
author = {Olivas Alonso, Carmen and Chiralt, Amparo and Torres-Giner, Sergio},
title = {Incorporation of Fully Bio-Based Butylene Succinate Oligomers into Poly(butylene succinate) by Melt Mixing},
journal = {Polymers},
year = {2026},
volume = {18},
number = {10},
pages = {1190},
doi = {10.3390/polym18101190}
}
EUVIMED