Engineering Porous PET-RAFT Scaffolds with PLGA–Insulin Nanoparticles: Advancing Bone Tissue Regeneration Through Additive Manufacturing
Polymers · 12.05.2026 · 18 (10) · 1184
DOI: 10.3390/polym18101184 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 12.05.2026. Verfasst von Fernando E Rodríguez-Umanzor und 9 weiteren Autor:innen. Beteiligte Einrichtung: Departamento de Química, Facultad de Ciencias Naturales, Matemáticas y del Medio Ambiente, Universidad Tecnológica Metropolitana, Santiago 7800003, C…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 66 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fondo Nacional de Desarrollo Científico y Tecnológico, Fondo de Fomento al Desarrollo Científico y Tecnológico, Agencia Nacional de Investigación y Desarrollo.
Abstract (Originalsprache)
Multifunctional scaffolds that combine structural support with the controlled delivery of bioactive agents remain a major challenge in tissue engineering. To extend the use of these devices in biomedicine, 3D printing is presented as an alternative that enables the manufacture of complex devices tailored to each patient, thereby solving specific problems in a timely and efficient manner. In this study, porous 3D scaffolds were fabricated via digital light processing (DLP) using a PET-RAFT resin composed of 2-(dimethylamino)ethyl methacrylate (DMAEMA) and poly(ethylene glycol) diacrylate (PEGDA575). Sodium chloride (NaCl) was incorporated as a porogen, while insulin-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles were embedded as osteoinductive agents. The printed constructs exhibited high-resolution, reproducible trabecular-like architectures, as confirmed by micro-computed tomography (micro-CT), with interconnected pores averaging 70.7 ± 24.7 μm and a total porosity of 57.0 ± 6.98%. Thermal and chemical analyses confirmed scaffold stability and controlled degradability. Cytocompatibility assays using MC3T3-E1, C2C12, hGMSCs, and C166-GFP cells showed viability above 80% after 7 days (ISO 10993-5). Insulin-loaded nanoparticles enabled sustained release, characterized by an initial burst followed by gradual release up to 72 h. Dynamic bioreactor culture enhanced cell adhesion and RUNX2 expression, confirming the osteoinductive potential of the hybrid scaffold for advanced BTE applications. This study introduces an innovative PET-RAFT-derived resin that combines structural reinforcement with spatiotemporal regulation of insulin release, offering a potential strategy for enhanced biomaterial tissue engineering and tailored therapeutic interventions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Departamento de Química, Facultad de Ciencias Naturales, Matemáticas y del Medio Ambiente, Universidad Tecnológica Metropolitana, Santiago 7800003, Chile.
- Programa PhD en Ciencia de Materiales e Ingeniería de Procesos, Universidad Tecnológica Metropolitana, Santiago 8940000, Chile.
- Facultad de Ingeniería, Universidad San Sebastián, Santiago 8420524, Chile.
- Instituto Universitario de Investigación y Desarrollo Tecnológico (IDT), Santiago 8940000, Chile.
- Biomedical Engineering School, Faculty of Engineering, Universidad de Valparaíso, Valparaíso 2362905, Chile.
- Millennium Institute for Intelligent Healthcare Engineering (iHEALTH), Santiago 7820436, Chile.
ORCID-Profile: Fernando E Rodríguez-Umanzor, Scarleth A Romero-De la Fuente, Nicolás A Cohn-Inostroza, David Ortiz Puerta, Enrique Martínez-Campos, Claudio A Terraza Inostroza, Carmen M González-Henríquez
Förderung
- Fondo Nacional de Desarrollo Científico y Tecnológico
- Fondo de Fomento al Desarrollo Científico y Tecnológico
- Agencia Nacional de Investigación y Desarrollo
- FONDECYT
- FONDEF IDeA I+D
- National Doctoral Scholarship
- Ministerio de Ciencia, Innovación y Universidades
- CSIC
Zitieren
APA
Rodríguez-Umanzor, F. E., Sarabia-Vallejos, M. A., Acuña-Ruiz, N. F., Romero-De la Fuente, S. A., Cohn-Inostroza, N. A., Puerta, D. O., Martínez-Campos, E., Rodríguez-Hernández, J., Inostroza, C. A. T., & González-Henríquez, C. M. (2026). Engineering Porous PET-RAFT Scaffolds with PLGA–Insulin Nanoparticles: Advancing Bone Tissue Regeneration Through Additive Manufacturing. Polymers, 18(10), 1184. https://doi.org/10.3390/polym18101184
Vancouver
Rodríguez-Umanzor FE, Sarabia-Vallejos MA, Acuña-Ruiz NF, Romero-De la Fuente SA, Cohn-Inostroza NA, Puerta DO, et al. Engineering Porous PET-RAFT Scaffolds with PLGA–Insulin Nanoparticles: Advancing Bone Tissue Regeneration Through Additive Manufacturing. Polymers. 2026;18(10):1184. doi:10.3390/polym18101184
BibTeX
@article{RodrguezUmanzor2026,
author = {Rodríguez-Umanzor, Fernando E and Sarabia-Vallejos, Mauricio A and Acuña-Ruiz, Nicolás F and Romero-De la Fuente, Scarleth A and Cohn-Inostroza, Nicolás A and Puerta, David Ortiz and Martínez-Campos, Enrique and Rodríguez-Hernández, Juan and Inostroza, Claudio A Terraza and González-Henríquez, Carmen M},
title = {Engineering Porous PET-RAFT Scaffolds with PLGA–Insulin Nanoparticles: Advancing Bone Tissue Regeneration Through Additive Manufacturing},
journal = {Polymers},
year = {2026},
volume = {18},
number = {10},
pages = {1184},
doi = {10.3390/polym18101184}
}
EUVIMED