Chemical Recycling of Post-Consumer Polystyrene by Thermal Pyrolysis: High-Yield Recovery of Aromatic Hydrocarbons for Circular Plastic Economy
Polymers · 09.05.2026 · 18 (10) · 1172
DOI: 10.3390/polym18101172 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 09.05.2026. Verfasst von Joaquin Hernandez-Fernandez und 2 weiteren Autor:innen. Beteiligte Einrichtung: Chemistry Program, Department of Natural and Exact Sciences, University of Cartagena, San Pablo Campus, Cartagena de Indias 130015, Colombia. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study evaluates the non-catalytic thermal pyrolysis of post-consumer polystyrene (PS) in a laboratory-scale batch fixed-bed reactor to recover aromatic-rich liquid products. The PS feedstock was characterized by thermogravimetric analysis (TGA) and micro-Raman spectroscopy to assess its thermal behavior and chemical homogeneity. In addition, the main TGA degradation region was analyzed using Coats–Redfern, Horowitz–Metzger, and Broido kinetic models, yielding apparent activation energies of 269.18, 288.83, and 280.69 kJ mol−1, respectively. Pyrolysis experiments were performed at final temperatures of 400, 450, and 500 °C and heating rates of 10 and 20 °C min−1 under continuous N2 flow. The maximum liquid yield reached 95.2 wt% at 500 °C and 20 °C min−1, while the estimated gaseous fraction decreased to approximately 2.0 wt%. ANOVA confirmed that final temperature was the dominant factor controlling liquid recovery, contributing approximately 83% of the model variability, whereas heating rate had a secondary but significant effect. GC–MS analysis showed that the pyrolysis oil was mainly composed of aromatic hydrocarbons, including styrene, toluene, and ethylbenzene, with increasing temperature promoting the redistribution of the liquid fraction toward lighter monoaromatic compounds. These results indicate that non-catalytic fixed-bed pyrolysis is a promising route for converting post-consumer PS into aromatic-rich liquid products. However, the recovered oil should be considered a complex mixture rather than a purified monomer stream, and further gas-phase characterization, downstream purification, energy-balance evaluation, life-cycle assessment, and techno-economic analysis are required before definitive claims regarding industrial circularity or environmental performance can be established.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chemistry Program, Department of Natural and Exact Sciences, University of Cartagena, San Pablo Campus, Cartagena de Indias 130015, Colombia.
- Department of Natural and Exact Science, Universidad de la Costa, Barranquilla 080002, Colombia.
- Food Packaging and Shelf-Life Research Group (FP & SL), Food Engineering Program, University of Cartagena, Cartagena de Indias 130015, Colombia.
ORCID-Profile: Joaquin Hernandez-Fernandez, Rafael Gonzalez-Cuello, Rodrigo Ortega-Toro
Zitieren
APA
Hernandez-Fernandez, J., Gonzalez-Cuello, R., & Ortega-Toro, R. (2026). Chemical Recycling of Post-Consumer Polystyrene by Thermal Pyrolysis: High-Yield Recovery of Aromatic Hydrocarbons for Circular Plastic Economy. Polymers, 18(10), 1172. https://doi.org/10.3390/polym18101172
Vancouver
Hernandez-Fernandez J, Gonzalez-Cuello R, Ortega-Toro R. Chemical Recycling of Post-Consumer Polystyrene by Thermal Pyrolysis: High-Yield Recovery of Aromatic Hydrocarbons for Circular Plastic Economy. Polymers. 2026;18(10):1172. doi:10.3390/polym18101172
BibTeX
@article{HernandezFernandez2026,
author = {Hernandez-Fernandez, Joaquin and Gonzalez-Cuello, Rafael and Ortega-Toro, Rodrigo},
title = {Chemical Recycling of Post-Consumer Polystyrene by Thermal Pyrolysis: High-Yield Recovery of Aromatic Hydrocarbons for Circular Plastic Economy},
journal = {Polymers},
year = {2026},
volume = {18},
number = {10},
pages = {1172},
doi = {10.3390/polym18101172}
}
EUVIMED