EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Power Consumption and Rubber Phase Evolution in an Intermeshing Mixer: A Three-Dimensional Non-Newtonian Volume-of-Fluid Computational Fluid Dynamics Analysis

Fareed Konadu Osman iD, Dandan Hou, Lei Han iD, Qi Zhou, Jie Gao, Chunsheng Zhang, Leilei Miao, Alfredo Iranzo iD

Polymers · 09.05.2026 · 18 (10) · 1163

DOI: 10.3390/polym18101163 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 09.05.2026. Verfasst von Fareed Konadu Osman und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 28 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhongce Rubber Group Company Limited, National Natural Science Foundation of China.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the influence of key operating parameters of fill factor, rotor speed, and rotor wear on the power consumption of an isothermal intermeshing internal mixer. A three-dimensional computational fluid dynamics (CFD) model incorporating dynamic remeshing was developed using the finite volume method to solve the continuity and momentum equations for non-Newtonian rubber flow. The dynamic remeshing approach enabled accurate tracking of the moving rotor geometry and maintained mesh quality under varying operating conditions. The model integrates the actual mixer geometry and rheological properties of the rubber, and was validated against plant-scale power consumption data, showing good agreement. Simulations were performed across a range of operating conditions to quantify the effects of each parameter. Results indicate that increasing the fill factor from 50% to 82% raises normalized power from 14–19 kW/% to 17–22 kW/%, with higher levels producing extensive shear stress coverage to the rotor barrels but at the cost of potential clogging and reduced energy efficiency. Increasing rotor speed from 35 to 60 rpm increases normalized power from 20–22 kW/rpm to 22–23 kW/rpm, as higher rotor speeds intensify the local shear stress and strain rate fields near the rotor tips, thereby increasing power consumption. Rotor wear was found to significantly influence power consumption, with increasing wear leading to a progressive reduction in energy demand. The results indicate that worn rotor conditions reduce mechanical energy transfer due to diminished rotor–material interaction and increased clearances, resulting in lower shear stress generation within the mixing chamber. These findings identify operational windows that minimize energy costs while maintaining effective wall shear stress, offering practical guidance for optimizing mixer performance.

Schlagwörter

Stichwörter der Autor:innen

dynamic remeshingintermeshing rotor mixernon-Newtonian flowpower consumptionrubber mixing

Autor:innen und Institutionen

  • School of Energy Science and Engineering, Harbin Institute of Technology, Harbin 150001, China.
  • Zhongce Rubber Group Company Limited, Hangzhou 310018, China.
  • Dalian Rubber and Plastics Machinery Company Limited, Dalian 116036, China.
  • Energy Engineering Department, School of Engineering, University of Sevilla, 41092 Sevilla, Spain.

ORCID-Profile: Fareed Konadu Osman, Lei Han, Alfredo Iranzo

Förderung

  • Zhongce Rubber Group Company Limited
  • National Natural Science Foundation of China

Zitieren

APA

Osman, F. K., Hou, D., Han, L., Zhou, Q., Gao, J., Zhang, C., Miao, L., & Iranzo, A. (2026). Power Consumption and Rubber Phase Evolution in an Intermeshing Mixer: A Three-Dimensional Non-Newtonian Volume-of-Fluid Computational Fluid Dynamics Analysis. Polymers, 18(10), 1163. https://doi.org/10.3390/polym18101163

Vancouver

Osman FK, Hou D, Han L, Zhou Q, Gao J, Zhang C, et al. Power Consumption and Rubber Phase Evolution in an Intermeshing Mixer: A Three-Dimensional Non-Newtonian Volume-of-Fluid Computational Fluid Dynamics Analysis. Polymers. 2026;18(10):1163. doi:10.3390/polym18101163

BibTeX
@article{Osman2026,
  author = {Osman, Fareed Konadu and Hou, Dandan and Han, Lei and Zhou, Qi and Gao, Jie and Zhang, Chunsheng and Miao, Leilei and Iranzo, Alfredo},
  title = {Power Consumption and Rubber Phase Evolution in an Intermeshing Mixer: A Three-Dimensional Non-Newtonian Volume-of-Fluid Computational Fluid Dynamics Analysis},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {10},
  pages = {1163},
  doi = {10.3390/polym18101163}
}
Kostenlos starten →