EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Designing Soft and Transparent Films Based on Multi-Phase Polypropylene Copolymers and Styrene Block Copolymers

Markus Gahleitner, Dietrich Gloger, Katja Klimke, Martina Sandholzer, Jingbo Wang

Polymers · 06.05.2026 · 18 (9) · 1140

DOI: 10.3390/polym18091140 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 06.05.2026. Verfasst von Markus Gahleitner und 4 weiteren Autor:innen. Beteiligte Einrichtung: Borealis Polyolefine GmbH, St. Peterstr. 25, 4021 Linz, Austria. Die Arbeit nennt 63 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Concerns about the environmental and health impacts of plasticized poly (vinyl chloride) (PVC), from plasticizer loss to microplastic formation, have created a clear demand to find alternative packaging materials for medical and pharmaceutical use. As a possible polyolefin-based alternative, we blended polypropylene–ethylene copolymers with different ethylene content-controlled phase structures with styrene–ethylene/butylene–styrene block copolymer (SEBS), as modifier. SEBS is elastomeric and performs mechanically like a cross-linked rubber due to its unique microphase-separated morphology of hard spherical polystyrene (PS) domains dispersed in the soft elastomeric ethylene-butylene copolymer (EB) phase. Tests with injection-molded samples and cast films demonstrated promising combinations of flexibility, durability, and transparency—qualities essential for soft medical packaging like infusion pouches and blow–fill–seal bottles. For the desired level of flexibility (reflected by a flexural modulus of 150–250 MPa), blends with two random-heterophasic (RAHECO) copolymers achieved the lower limit with only 15–25 wt.-% SEBS, compared to the 37 wt.-% needed for a single-phase random copolymer (RACO). These blends also exhibited greater toughness and excellent transparency. In contrast, a standard impact copolymer (HECO), with its more crystalline matrix, required a higher modifier content of 45 wt.-% SEBS. Film morphology analysis indicated a gradual shift in disperse phase structure and orientation, leading to phase inversion at the highest SEBS content without negatively affecting transparency.

Schlagwörter

Stichwörter der Autor:innen

filmmechanicsmedical applicationsmorphologyopticspolypropylenestyrene elastomers

Autor:innen und Institutionen

  • Borealis Polyolefine GmbH, St. Peterstr. 25, 4021 Linz, Austria.

Zitieren

APA

Gahleitner, M., Gloger, D., Klimke, K., Sandholzer, M., & Wang, J. (2026). Designing Soft and Transparent Films Based on Multi-Phase Polypropylene Copolymers and Styrene Block Copolymers. Polymers, 18(9), 1140. https://doi.org/10.3390/polym18091140

Vancouver

Gahleitner M, Gloger D, Klimke K, Sandholzer M, Wang J. Designing Soft and Transparent Films Based on Multi-Phase Polypropylene Copolymers and Styrene Block Copolymers. Polymers. 2026;18(9):1140. doi:10.3390/polym18091140

BibTeX
@article{Gahleitner2026,
  author = {Gahleitner, Markus and Gloger, Dietrich and Klimke, Katja and Sandholzer, Martina and Wang, Jingbo},
  title = {Designing Soft and Transparent Films Based on Multi-Phase Polypropylene Copolymers and Styrene Block Copolymers},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {9},
  pages = {1140},
  doi = {10.3390/polym18091140}
}
Kostenlos starten →