EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Sugarcane Bagasse-Derived Cellulose Nanocrystals on the Thermal, Structural, Morphological and Biodegradation Properties of Poly(ε-caprolactone) and Poly(lactic Acid)

Mbongeni Ngwenya iD, Thandi Patricia Gumede iD, Bennie Motloung iD

Polymers · 04.05.2026 · 18 (9) · 1132

DOI: 10.3390/polym18091132 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.05.2026. Verfasst von Mbongeni Ngwenya und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Life Sciences, Central University of Technology, Bloemfontein 9301, Free State, South Africa. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 70 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation, the National Research Foundation (NRF) of South Africa through the Thuthuka Programme, the DSI-NRF postgraduate student fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Biodegradable materials offer promising alternatives to petroleum-based polymers. This study investigates poly(ε-caprolactone) (PCL) and poly(lactic acid) (PLA) nanocomposites reinforced with 1, 3 and 5 wt.% cellulose nanocrystals (CNCs) extracted from sugarcane bagasse via melt blending. The thermal, structural, morphological and biodegradation properties were evaluated using differential scanning calorimetry (DSC), scanning electron microscopy (SEM), X-ray scattering (WAXS/SAXS), Fourier-transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and biodegradation tests. SEM results revealed uniform dispersion of CNCs at low concentrations, whereas agglomeration occurred at higher concentrations for both PCL and PLA. At 1 wt.% CNCs, there was minimal impact on the biodegradation rates of both polymers, despite achieving uniform dispersion. However, significant acceleration in biodegradation was observed at 5 wt.% CNCs, attributed to the enhanced hydrophilic nature of the nanocomposites. CNCs acted as nucleating agents in PCL crystallization, while reducing the crystallization rate of PLA. This led to a mass loss of 36.4% for PCL and 82.2% for PLA, correlating with increased and decreased crystallinities, respectively. The study concludes that the hydrophilic–hydrophobic balance has a more significant influence on biodegradation rates than crystallinity or CNC dispersion.

Schlagwörter

Stichwörter der Autor:innen

bionanocompositescrystallinitymorphologynanocellulosepoly(lactic acid)poly(ε-caprolactone)sustainability

Autor:innen und Institutionen

  • Department of Life Sciences, Central University of Technology, Bloemfontein 9301, Free State, South Africa.
  • Department of Chemistry and Polymer Science, Stellenbosch University, Private Bag X1, Matieland 7602, South Africa.

ORCID-Profile: Mbongeni Ngwenya, Thandi Patricia Gumede, Bennie Motloung

Förderung

  • National Research Foundation
  • the National Research Foundation (NRF) of South Africa through the Thuthuka Programme
  • the DSI-NRF postgraduate student fund
  • the postgraduate student fund of the Central University of Technology
  • Future Coal Mining

Zitieren

APA

Ngwenya, M., Gumede, T. P., & Motloung, B. (2026). Effect of Sugarcane Bagasse-Derived Cellulose Nanocrystals on the Thermal, Structural, Morphological and Biodegradation Properties of Poly(ε-caprolactone) and Poly(lactic Acid). Polymers, 18(9), 1132. https://doi.org/10.3390/polym18091132

Vancouver

Ngwenya M, Gumede TP, Motloung B. Effect of Sugarcane Bagasse-Derived Cellulose Nanocrystals on the Thermal, Structural, Morphological and Biodegradation Properties of Poly(ε-caprolactone) and Poly(lactic Acid). Polymers. 2026;18(9):1132. doi:10.3390/polym18091132

BibTeX
@article{Ngwenya2026,
  author = {Ngwenya, Mbongeni and Gumede, Thandi Patricia and Motloung, Bennie},
  title = {Effect of Sugarcane Bagasse-Derived Cellulose Nanocrystals on the Thermal, Structural, Morphological and Biodegradation Properties of Poly(ε-caprolactone) and Poly(lactic Acid)},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {9},
  pages = {1132},
  doi = {10.3390/polym18091132}
}
Kostenlos starten →