Hexagonal-Boron-Nitride-Reinforced Butyl/Chloroprene Rubber Composites for Tire Curing Bladder Applications
Polymers · 30.04.2026 · 18 (9) · 1112
DOI: 10.3390/polym18091112 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 30.04.2026. Verfasst von Baran Cetin und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Polymer Science and Technology, Istanbul Technical University, 34369 Istanbul, Türkiye. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study investigates a thermal management strategy for butyl/chloroprene rubber (IIR/CR) bladder compounds by incorporating hexagonal boron nitride (h-BN) as a thermally conductive filler to enhance heat transfer efficiency. Compounds containing 0, 10, 25, and 33 wt% h-BN were prepared via solution mixing to ensure uniform dispersion and subsequently vulcanized using a hot press. The materials were characterized in terms of morphology, cure behavior using a moving die rheometer (MDR), thermal conductivity, crosslink density, mechanical properties, and dynamic mechanical analysis (DMA). The incorporation of h-BN significantly enhanced thermal performance, nearly doubling the thermal conductivity at 33 wt%. MDR measurements demonstrated that this improved heat transfer capability accelerated the thermal onset of vulcanization, effectively reducing scorch time. Mechanical testing revealed a systematic increase in stiffness at application-relevant low strain levels (25–50%), attributed to hydrodynamic reinforcement, accompanied by a progressive increase in elongation at break. This enhanced extensibility is associated with the presence of lamellar h-BN platelets, which facilitate stress redistribution and promote dynamic chain mobility under deformation. DMA showed that h-BN incorporation increased the storage modulus and intensified the Payne effect, confirming the formation of a robust physical filler network. Overall, the incorporation of h-BN delivers a formulation pathway for energy-efficient tire curing bladders by significantly improving heat transfer efficiency and dimensional stability.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Polymer Science and Technology, Istanbul Technical University, 34369 Istanbul, Türkiye.
- Brisa Bridgestone Sabanci Tyre Manufacturing and Trading Inc., 41310 Kocaeli, Türkiye.
- TEMAG Labs, Faculty of Textile Technologies and Design, Istanbul Technical University, 34437 Istanbul, Türkiye.
- Faculty of Engineering and Architecture, Recep Tayyip Erdogan University, 53100 Rize, Türkiye.
- Department of Industrial Engineering, College of Engineering, University of Business and Technology, Jeddah 21448, Saudi Arabia.
- School of Computing Engineering and the Built Environment, Edinburgh Napier University, Edinburgh EH10 5DT, UK.
ORCID-Profile: Baran Cetin, Mehmet Durmus Calisir, Islam Shyha
Zitieren
APA
Cetin, B., Calisir, M. D., Kilic, A., & Shyha, I. (2026). Hexagonal-Boron-Nitride-Reinforced Butyl/Chloroprene Rubber Composites for Tire Curing Bladder Applications. Polymers, 18(9), 1112. https://doi.org/10.3390/polym18091112
Vancouver
Cetin B, Calisir MD, Kilic A, Shyha I. Hexagonal-Boron-Nitride-Reinforced Butyl/Chloroprene Rubber Composites for Tire Curing Bladder Applications. Polymers. 2026;18(9):1112. doi:10.3390/polym18091112
BibTeX
@article{Cetin2026,
author = {Cetin, Baran and Calisir, Mehmet Durmus and Kilic, Ali and Shyha, Islam},
title = {Hexagonal-Boron-Nitride-Reinforced Butyl/Chloroprene Rubber Composites for Tire Curing Bladder Applications},
journal = {Polymers},
year = {2026},
volume = {18},
number = {9},
pages = {1112},
doi = {10.3390/polym18091112}
}
EUVIMED