EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Functionalization on the Textural Properties and Photocatalytic Performance of ZnO-Modified Metakaolin Based-Geopolymer

Adriana-Gabriela Schiopu iD, Mihai Oproescu iD, Ștefan Mira, Sorin Georgian Moga, Ecaterina Magdalena Modan iD, Paul Mereuță iD, Miruna-Adriana Ioța, Alexandru Berevoianu iD

Polymers · 30.04.2026 · 18 (9) · 1110

DOI: 10.3390/polym18091110 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.04.2026. Verfasst von Adriana-Gabriela Schiopu und 7 weiteren Autor:innen. Beteiligte Einrichtung: Doctoral School Materials Science and Engineering, National University of Science and Technology Politehnica Bucharest, Splaiul Independentei No. 313…. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Metakaolin-based geopolymers modified with ZnO and surface-functionalized ZnO were developed and investigated in terms of structure, morphology, textural properties, and photocatalytic performance. ZnO, ZnO@AS(zinc oxide functionalized with steric acid), and ZnO@PEG(zinc oxide functionalized with polyethylene glycol) were incorporated into the geopolymer matrix and characterized by XRD(X-ray diffraction), ATR–FTIR(Fourier transform infrared spectroscopy in attenuated total reflectance, SEM–EDS (scanning electron microscopy coupled with spectroscopy with energy-dispersive X-ray spectroscopy), and BET(Brunauer–Emmett–Teller) analysis. The results showed that ZnO incorporation did not significantly modify the amorphous aluminosilicate network but affected the morphology and porosity depending on the functionalization method. ZnO@AS induced matrix densification and reduced accessible porosity, while ZnO@PEG improved particle dispersion and preserved the porous structure. Among the ZnO-modified metakaolin-based geopolymers, GP/ZnO@PEG(geopolymer with ZnO@PEG particles) exhibited the highest photocatalytic performance, characterized by a BET surface area of 17.22 m2/g, an apparent kinetic constant of 0.01668 min−1, and a half-life of approximately 41 min, achieving approximately 90% methylene blue removal after 120 min of UV-A irradiation. The study demonstrates that ZnO surface functionalization controls the interfacial interaction with the geopolymer matrix and plays a key role in the performance of geopolymer-based photocatalytic materials.

Schlagwörter

Stichwörter der Autor:innen

ZnO-modified metakaolin geopolymersphotocatalytic activitysurface functionalization

Autor:innen und Institutionen

  • Doctoral School Materials Science and Engineering, National University of Science and Technology Politehnica Bucharest, Splaiul Independentei No. 313, Sector 6, 060042 Bucharest, Romania.
  • Faculty of Mechanics and Technology, Pitesti University Centre, National University of Science and Technology Politehnica Bucharest, 110040 Pitesti, Romania.
  • Faculty of Electronics, Communication and Computers, Pitesti University Centre, National University of Science and Technology Politehnica Bucharest, 110040 Pitesti, Romania.
  • Regional Center of Research & Development for Materials, Processes and Innovative Products Dedicated to the Automotive Industry (CRCD-AUTO), Pitesti University Centre, National University of Science and Technology Polit…
  • Horia Hulubei National Institute for R&D in Physics and Nuclear Engineering (IFIN-HH), 077125 Magurele, Romania.
  • National R&D Institute for Non-Ferrous and Rare Metals IMNR, 077145 Pantelimon, Romania.

ORCID-Profile: Adriana-Gabriela Schiopu, Mihai Oproescu, Ecaterina Magdalena Modan, Paul Mereuță, Alexandru Berevoianu

Zitieren

APA

Schiopu, A. G., Oproescu, M., Mira, Ș., Moga, S. G., Modan, E. M., Mereuță, P., Ioța, M. A., & Berevoianu, A. (2026). Influence of Functionalization on the Textural Properties and Photocatalytic Performance of ZnO-Modified Metakaolin Based-Geopolymer. Polymers, 18(9), 1110. https://doi.org/10.3390/polym18091110

Vancouver

Schiopu AG, Oproescu M, Mira Ș, Moga SG, Modan EM, Mereuță P, et al. Influence of Functionalization on the Textural Properties and Photocatalytic Performance of ZnO-Modified Metakaolin Based-Geopolymer. Polymers. 2026;18(9):1110. doi:10.3390/polym18091110

BibTeX
@article{Schiopu2026,
  author = {Schiopu, Adriana-Gabriela and Oproescu, Mihai and Mira, Ștefan and Moga, Sorin Georgian and Modan, Ecaterina Magdalena and Mereuță, Paul and Ioța, Miruna-Adriana and Berevoianu, Alexandru},
  title = {Influence of Functionalization on the Textural Properties and Photocatalytic Performance of ZnO-Modified Metakaolin Based-Geopolymer},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {9},
  pages = {1110},
  doi = {10.3390/polym18091110}
}
Kostenlos starten →