EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Drive Research of Nanofiber-Reinforced Polyacrylamide Hydrogels

Kexu An, Xuewei Shi, Pengli Zhang, Hansheng Liao, Kaiming Hu, Jian Wang, Chenxing Xiang, Ning Hu

Polymers · 30.04.2026 · 18 (9) · 1101

DOI: 10.3390/polym18091101 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.04.2026. Verfasst von Kexu An und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300401, China. Die Arbeit nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chinese National Natural Science Fund, Innovative Research Groups of Natural Science Foundation of Hebei Province, Major Basic Research Project of Hebei Province Natural Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Hydrogels have emerged as a crucial category of polymeric materials in materials science due to their three-dimensional network structure and remarkable capacity for water absorption and retention. However, conventional single-function hydrogels do not satisfy the increasing demands of advanced applications in biomedicine and environmental engineering. This paper focuses on the design, preparation, and performance characterization of nanofiber-reinforced polyacrylamide hydrogels to overcome this limitation. A bilayer structure, consisting of tensile layers and actuator layers based on a polyacrylamide/sodium alginate (PAM/SA) matrix integrated with functional materials, was developed. Nanocellulose (CNF) was incorporated to regulate mechanical properties by adjusting its content ratio with PAM, while poly-N-isopropylacrylamide (PNIPAM) and multi-walled carbon nanotubes (MWCNTs) were added to confer photothermal responsiveness. The deformation of the hydrogel was induced by temperature changes resulting from infrared illumination. The results indicate that the CNF-reinforced hydrogels exhibit enhanced mechanical strength—with the tensile strength reaching 17 kPa (89% higher than pure PAM) and fracture strain approaching 900% when the CNF content is 0.44 wt.% and PAM/SA mass ratio is 4:1—and they display reversible thermosensitive responses (reaching 60 °C within 100 s under near-infrared irradiation) following the incorporation of carbon nanotubes. This paper presents a novel strategy for the development of multifunctional hydrogel-based actuated systems, expanding the application potential of hydrogels in human motion tracking and drug delivery.

Schlagwörter

Stichwörter der Autor:innen

bilayer structureinfrared responsenanofiber reinforcementpolyacrylamide hydrogel

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Hebei University of Technology, Tianjin 300401, China.
  • College of Aerospace Engineering, Chongqing University, Chongqing 400044, China.
  • Interdisciplinary Research Institute of Advanced Intelligent Equipment, Xihua University, Chengdu 610039, China.
  • School of Mechanical Engineering, Xihua University, Chengdu 611739, China.

Förderung

  • Chinese National Natural Science Fund
  • Innovative Research Groups of Natural Science Foundation of Hebei Province
  • Major Basic Research Project of Hebei Province Natural Science Foundation
  • Natural Science Foundation of Chongqing
  • Opening Project of Key Laboratory of Testing Technology for Manufacturing Process

Zitieren

APA

An, K., Shi, X., Zhang, P., Liao, H., Hu, K., Wang, J., Xiang, C., & Hu, N. (2026). Design and Drive Research of Nanofiber-Reinforced Polyacrylamide Hydrogels. Polymers, 18(9), 1101. https://doi.org/10.3390/polym18091101

Vancouver

An K, Shi X, Zhang P, Liao H, Hu K, Wang J, et al. Design and Drive Research of Nanofiber-Reinforced Polyacrylamide Hydrogels. Polymers. 2026;18(9):1101. doi:10.3390/polym18091101

BibTeX
@article{An2026,
  author = {An, Kexu and Shi, Xuewei and Zhang, Pengli and Liao, Hansheng and Hu, Kaiming and Wang, Jian and Xiang, Chenxing and Hu, Ning},
  title = {Design and Drive Research of Nanofiber-Reinforced Polyacrylamide Hydrogels},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {9},
  pages = {1101},
  doi = {10.3390/polym18091101}
}
Kostenlos starten →