EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Process and Structure Modeling of Architected Thermoplastic Composites Using Shape Forming Elements

Rebecca H Olanrewaju iD, Yuefeng Jiang, Thao D Nguyen iD, David O Kazmer iD

Polymers · 30.04.2026 · 18 (9) · 1098

DOI: 10.3390/polym18091098 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 30.04.2026. Verfasst von Rebecca H Olanrewaju und 3 weiteren Autor:innen. Beteiligte Einrichtung: Francis College of Engineering, University of Massachusetts Lowell, Lowell, MA 01854, USA. Die Arbeit nennt 52 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: U.S. Federal Award, National Science Foundation.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Architected polymer composites use spatially organized phases to achieve targeted property combinations. Shape forming elements (SFEs) are modular coextrusion die inserts that impose internal architectures by reshaping multiple melt streams. This study evaluates three SFE designs (Jacks, I-Beam, and Barn Door) that position a liquid crystalline polymer (LCP) and an amorphous polyamide (APA) in distinct core–shell configurations. Polymer clay prototyping and ANSYS Polyflow simulations were used to screen flow behavior, followed by extrusion at two puller speeds and characterization via optical microscopy and tensile testing. Microscopy revealed that abrupt area transitions and viscosity contrast disrupt encapsulation and distort designed features. Regression analysis showed that LCP content governs stiffness and strength, while higher puller speed enhances reinforcement through molecular orientation. Cross sectional geometries were quantified using interfacial perimeter, moments of inertia, and polar dispersion ratios, and correlated to tensile performance. Increased interfacial length reduced modulus, strength, and ductility. Modulus improved with LCP orientation and confinement, strength increased when LCP was placed at vertical extremities, and elongation was maximized by horizontally distributing LCP within a thick APA shell. These results demonstrate that SFEs enable tunable tradeoffs between stiffness, strength, and ductility.

Schlagwörter

Stichwörter der Autor:innen

architected compositescoextrusiondie designliquid crystalline polymerpolyamideregression modelingshape forming elements

Autor:innen und Institutionen

  • Francis College of Engineering, University of Massachusetts Lowell, Lowell, MA 01854, USA.
  • Whiting School of Engineering, Johns Hopkins University, Baltimore, MD 21218, USA.

ORCID-Profile: Rebecca H Olanrewaju, Thao D Nguyen, David O Kazmer

Förderung

  • U.S. Federal Award
  • National Science Foundation

Zitieren

APA

Olanrewaju, R. H., Jiang, Y., Nguyen, T. D., & Kazmer, D. O. (2026). Process and Structure Modeling of Architected Thermoplastic Composites Using Shape Forming Elements. Polymers, 18(9), 1098. https://doi.org/10.3390/polym18091098

Vancouver

Olanrewaju RH, Jiang Y, Nguyen TD, Kazmer DO. Process and Structure Modeling of Architected Thermoplastic Composites Using Shape Forming Elements. Polymers. 2026;18(9):1098. doi:10.3390/polym18091098

BibTeX
@article{Olanrewaju2026,
  author = {Olanrewaju, Rebecca H and Jiang, Yuefeng and Nguyen, Thao D and Kazmer, David O},
  title = {Process and Structure Modeling of Architected Thermoplastic Composites Using Shape Forming Elements},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {9},
  pages = {1098},
  doi = {10.3390/polym18091098}
}
Kostenlos starten →