EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Additive Manufacturing of Discontinuous Carbon Fibre-Reinforced Polymer (CFRP): A Study on Parametric Optimization Towards Mechanical Properties

Ahmed Degnah iD, Abdulaziz Kurdi iD, Alokesh Pramanik iD, Animesh Kumar Basak iD

Polymers · 25.04.2026 · 18 (9) · 1048

DOI: 10.3390/polym18091048 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 25.04.2026. Verfasst von Ahmed Degnah und 3 weiteren Autor:innen. Beteiligte Einrichtung: Advanced Materials Technology Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442, Saudi Arabia. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The focus of this work was to investigate the mechanical properties of additively manufactured (AM) discontinuous carbon fibre-reinforced polymer (DCFRP) composites. Towards the specimen’s fabrication, the Fused Filament Fabrication (FFF) additive manufacturing technique was employed. A number of input printing parameters were varied, such as the infill pattern, infill density, layer height, shell configuration, and raster orientation, in a systematic way. The role of these paraments on the mechanical properties, such as tensile, flexural, and impact strength were investigated. The data was analysed in-depth and the “main effect method” was employed for their comparative ranking. The results of this study showed that tensile and bending strengths were strongly correlated with material content and structural reinforcement. The specimens attained up to 76.7 MPa of tensile strength, while the flexural strength was up to 159.4 MPa, with a deflection of up to 8 mm and 16 mm, respectively. Solid infills, higher densities, finer layer heights, and added shells significantly improved the strength and stiffness. Grid-patterned and low-density specimens caused poor load-bearing capacities, while hexagonal and gyroid infills offered a more balanced performance.

Schlagwörter

Stichwörter der Autor:innen

additive manufacturingcarbon fibre-reinforced polymer (CFRP)deformationdiscontinuous fibremechanical property

Autor:innen und Institutionen

  • Advanced Materials Technology Institute, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442, Saudi Arabia.
  • The Center of Excellence for Advanced Materials and Manufacturing, King Abdulaziz City for Science and Technology, P.O. Box 6086, Riyadh 11442, Saudi Arabia.
  • School of Civil and Mechanical Engineering, Curtin University, Perth, WA 6102, Australia.
  • Adelaide Microscopy, Adelaide University, Adelaide, SA 5005, Australia.
  • Centre for Research Impact & Outcome, Chitkara University Institute of Engineering and Technology, Chitkara University, Rajpura 140401, Punjab, India.

ORCID-Profile: Ahmed Degnah, Abdulaziz Kurdi, Alokesh Pramanik, Animesh Kumar Basak

Zitieren

APA

Degnah, A., Kurdi, A., Pramanik, A., & Basak, A. K. (2026). Additive Manufacturing of Discontinuous Carbon Fibre-Reinforced Polymer (CFRP): A Study on Parametric Optimization Towards Mechanical Properties. Polymers, 18(9), 1048. https://doi.org/10.3390/polym18091048

Vancouver

Degnah A, Kurdi A, Pramanik A, Basak AK. Additive Manufacturing of Discontinuous Carbon Fibre-Reinforced Polymer (CFRP): A Study on Parametric Optimization Towards Mechanical Properties. Polymers. 2026;18(9):1048. doi:10.3390/polym18091048

BibTeX
@article{Degnah2026,
  author = {Degnah, Ahmed and Kurdi, Abdulaziz and Pramanik, Alokesh and Basak, Animesh Kumar},
  title = {Additive Manufacturing of Discontinuous Carbon Fibre-Reinforced Polymer (CFRP): A Study on Parametric Optimization Towards Mechanical Properties},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {9},
  pages = {1048},
  doi = {10.3390/polym18091048}
}
Kostenlos starten →