Design and Manufacturing of Artificial Composite Stone Using Waste Limestone and Glass-Based Reinforcements
Polymers · 24.04.2026 · 18 (9) · 1040
DOI: 10.3390/polym18091040 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 24.04.2026. Verfasst von Şükrü Çetinkaya. Beteiligte Einrichtung: Mechanical Engineering Department, Engineering Faculty, Dicle University, Diyarbakır 21280, Türkiye. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Dicle University Research Projects Coordinatoryship (DÜBAP), Dicle University Research Projects Coordinatorship.
Abstract (Originalsprache)
Artificial composite stones have recently attracted attention as multifunctional materials for construction and defense-related applications. In this study, a novel composite stone was developed using waste limestone as the primary mineral filler, combined with an unsaturated polyester resin matrix and reinforced with glass powder and chopped glass fibers. The influence of binder content and reinforcement type on physico-mechanical and microstructural behavior was investigated. Experimental characterization included water absorption, compressive strength, abrasion resistance, acid resistance, and optical microscopy. The results demonstrated that fine fillers improved matrix densification and reduced porosity, while short glass fiber reinforcement enhanced load-bearing capacity. Abrasion resistance and durability were found to depend on binder content and particle packing characteristics. Overall, the developed composite material exhibits promising mechanical performance, low water absorption, and improved durability, suggesting its potential as a candidate material for applications requiring environmental resistance, including potential use in defense-related camouflage applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Mechanical Engineering Department, Engineering Faculty, Dicle University, Diyarbakır 21280, Türkiye.
Förderung
- Dicle University Research Projects Coordinatoryship (DÜBAP)
- Dicle University Research Projects Coordinatorship
Zitieren
APA
Çetinkaya, Ş. (2026). Design and Manufacturing of Artificial Composite Stone Using Waste Limestone and Glass-Based Reinforcements. Polymers, 18(9), 1040. https://doi.org/10.3390/polym18091040
Vancouver
Çetinkaya Ş. Design and Manufacturing of Artificial Composite Stone Using Waste Limestone and Glass-Based Reinforcements. Polymers. 2026;18(9):1040. doi:10.3390/polym18091040
BibTeX
@article{etinkaya2026,
author = {Çetinkaya, Şükrü},
title = {Design and Manufacturing of Artificial Composite Stone Using Waste Limestone and Glass-Based Reinforcements},
journal = {Polymers},
year = {2026},
volume = {18},
number = {9},
pages = {1040},
doi = {10.3390/polym18091040}
}
EUVIMED