PLA/Collagen/Hydroxyapatite Ternary Biocomposites for Biodegradable Bone Screw Applications
Polymers · 21.04.2026 · 18 (8) · 1005
DOI: 10.3390/polym18081005 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 21.04.2026. Verfasst von Ayşegül Uzuner-Demir und 8 weiteren Autor:innen. Beteiligte Einrichtung: Polymer Science and Technology Graduate Program, Kocaeli University, Kocaeli 41001, Türkiye. Die Arbeit nennt 104 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific and Technological Research Council of Turkey, Kocaeli University.
Abstract (Originalsprache)
Poly(lactic acid) (PLA)-based biocomposites incorporating collagen (COLL) and hydroxyapatite (HA) were produced via melt micro-compounding and subsequent injection molding. 1,4-phenylene diisocyanate (PDI) was employed as a compatibilizer, while poly(ethylene glycol) (PEG) was used as a plasticizer. The morphological, thermal, rheological, and mechanical properties, as well as surface wettability, degradation behavior, and cytotoxicity, were comprehensively evaluated. SEM and DSC analyses revealed the phase distribution and thermal transitions, while rheological measurements showed that PEG reduced melt viscosity by increasing chain mobility. Mechanical performance was evaluated using tensile, impact, and DMA tests on standard specimens, indicating that HA primarily enhanced stiffness (elastic modulus), whereas PEG improved toughness, resulting in higher impact strength. Biodegradable bone screw prototypes were produced with the same formulations and subjected to torsion, enzymatic degradation, and MTT cytotoxicity tests. Degradation results indicated that biocomposites containing PEG, collagen, and HA exhibited accelerated mass loss. Overall, the 70/20/10 PLA/COLL/HA/PEG/PDI formulation was more suitable for soft (trabecular) bone tissue, while the 70/10/20 PLA/COLL/HA/PDI formulation showed advantages for hard (cortical) bone tissue applications.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Polymer Science and Technology Graduate Program, Kocaeli University, Kocaeli 41001, Türkiye.
- Halavet Food Company, Gerede 14900, Türkiye.
- Department of Chemical Engineering, Kocaeli University, Kocaeli 41001, Türkiye.
- Department of Mechanical Engineering, Bolu Abant Izzet Baysal University, Bolu 14030, Türkiye.
- Department of Molecular Biology and Genetic, Gebze Technical University, Kocaeli 41400, Türkiye.
- Kazlicesme R&D Center and Test Laboratories, Istanbul 34956, Türkiye.
ORCID-Profile: Zehra Betül Ahi, Mehmet Kodal
Förderung
- Scientific and Technological Research Council of Turkey
- Kocaeli University
Zitieren
APA
Uzuner-Demir, A., Yıldırım, R., Koçoğlu, H., Aydoğan-Gemici, M., Ahi, Z. B., Arıcan, F., Mert, O., Özkoç, G., & Kodal, M. (2026). PLA/Collagen/Hydroxyapatite Ternary Biocomposites for Biodegradable Bone Screw Applications. Polymers, 18(8), 1005. https://doi.org/10.3390/polym18081005
Vancouver
Uzuner-Demir A, Yıldırım R, Koçoğlu H, Aydoğan-Gemici M, Ahi ZB, Arıcan F, et al. PLA/Collagen/Hydroxyapatite Ternary Biocomposites for Biodegradable Bone Screw Applications. Polymers. 2026;18(8):1005. doi:10.3390/polym18081005
BibTeX
@article{UzunerDemir2026,
author = {Uzuner-Demir, Ayşegül and Yıldırım, Rumeysa and Koçoğlu, Hürol and Aydoğan-Gemici, Mihriban and Ahi, Zehra Betül and Arıcan, Fatih and Mert, Olcay and Özkoç, Güralp and Kodal, Mehmet},
title = {PLA/Collagen/Hydroxyapatite Ternary Biocomposites for Biodegradable Bone Screw Applications},
journal = {Polymers},
year = {2026},
volume = {18},
number = {8},
pages = {1005},
doi = {10.3390/polym18081005}
}
EUVIMED