EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Tailoring Pore Size and Surface Charge of Polyamide Reverse Osmosis Membranes via Alkaline Post-Treatment for Brackish Water Desalination

Ying Li, Renzhong Wang, Zheng Liu, Yang Zhao, Long Li, Qian Cao, Feng Shao iD

Polymers · 19.04.2026 · 18 (8) · 995

DOI: 10.3390/polym18080995 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 19.04.2026. Verfasst von Ying Li und 6 weiteren Autor:innen. Beteiligte Einrichtung: State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 79 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Basic Research Program of Jiangsu.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Overcoming the inherent permeability–selectivity trade−off is essential to broaden the practical application of polyamide (PA) reverse osmosis (RO) membranes in brackish water desalination. In this study, we developed a facile and cost-effective alkaline (NaOH) post-treatment method to fabricate high−performance loose-structured RO membranes. The NaOH post−treatment hydrolyzed part of the amide bonds within the membrane, converting them to negatively charged carboxyl groups. This process led to a slight increase in pore size and the formation of a looser structure. Molecular weight cut−off (MWCO) measurements confirmed that the pore size slightly increased from 0.19 nm to 0.21 nm, while X−ray photoelectron spectroscopy (XPS) and zeta potential measurements confirmed the conversion of amide bonds to carboxyl groups, which further enhanced the surface electronegativity. The synergistic effects of pore size enlargement and surface charge modification were elucidated as the key mechanisms for performance enhancement. The TPA membrane exhibited a 2−fold increase in water permeance (from 1.05 to 3.21 L m−2 h−1 bar−1), while the enhanced surface negative charge contributed to maintaining a high NaCl rejection of 98.5%. Additionally, the membrane also exhibited excellent pH stability as well as long-term stability over 100 h of continuous operation. This easily scalable post−treatment strategy offers a low−cost route to fabricate loose-structured membranes, with significant potential to enhance efficiency and reduce costs in brackish water desalination.

Schlagwörter

Stichwörter der Autor:innen

alkaline post-treatmentbrackish water desalinationpolyamide reverse osmosis membranepore size enlargementsurface charge enhancement

Autor:innen und Institutionen

  • State Key Laboratory of Materials-Oriented Chemical Engineering, College of Chemical Engineering, Nanjing Tech University, Nanjing 211816, China.
  • Suzhou National Laboratory, Suzhou 215123, China.

ORCID-Profile: Feng Shao

Förderung

  • National Natural Science Foundation of China
  • Basic Research Program of Jiangsu

Zitieren

APA

Li, Y., Wang, R., Liu, Z., Zhao, Y., Li, L., Cao, Q., & Shao, F. (2026). Tailoring Pore Size and Surface Charge of Polyamide Reverse Osmosis Membranes via Alkaline Post-Treatment for Brackish Water Desalination. Polymers, 18(8), 995. https://doi.org/10.3390/polym18080995

Vancouver

Li Y, Wang R, Liu Z, Zhao Y, Li L, Cao Q, et al. Tailoring Pore Size and Surface Charge of Polyamide Reverse Osmosis Membranes via Alkaline Post-Treatment for Brackish Water Desalination. Polymers. 2026;18(8):995. doi:10.3390/polym18080995

BibTeX
@article{Li2026,
  author = {Li, Ying and Wang, Renzhong and Liu, Zheng and Zhao, Yang and Li, Long and Cao, Qian and Shao, Feng},
  title = {Tailoring Pore Size and Surface Charge of Polyamide Reverse Osmosis Membranes via Alkaline Post-Treatment for Brackish Water Desalination},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {8},
  pages = {995},
  doi = {10.3390/polym18080995}
}
Kostenlos starten →