EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Temperature-Dependent Thermal Properties of Nearly Amorphous Polyamide 6

Julian Klingenbeck iD, Alexander Lion, Michael Johlitz iD

Polymers · 17.04.2026 · 18 (8) · 981

DOI: 10.3390/polym18080981 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.04.2026. Verfasst von Julian Klingenbeck und 2 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Mechanics, University of the Bundeswehr Munich, 85577 Neubiberg, Germany. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The Fused Filament Fabrication (FFF) process has established itself as a key technology in prototyping and development and has garnered increasing interest in academic research. A substantial body of research on the FFF process has focused on the influence of process parameters on the resultant material/part properties. The thermal history of the printed part has proven itself as one of the most important factors in the printing process. It influences warping behavior, dimensional accuracy, build plate adhesion, as well as the mechanical properties of the finished part. A key requirement for understanding the influence of thermal history is the knowledge of the thermal properties of the considered material. In this study, the temperature-dependent thermal properties (isobaric heat capacity, thermal conductivity and density) of an unfilled polyamide 6 material for 3D printing are provided. Special attention is given to discussing the challenges associated with measuring these properties, particularly regarding how well the measured values represent the actual conditions during the printing process.

Schlagwörter

Stichwörter der Autor:innen

FDMPA6densityfused filament fabrication (FFF)heat capacitynylonthermal conductivity

Autor:innen und Institutionen

  • Institute for Mechanics, University of the Bundeswehr Munich, 85577 Neubiberg, Germany.

ORCID-Profile: Julian Klingenbeck, Michael Johlitz

Zitieren

APA

Klingenbeck, J., Lion, A., & Johlitz, M. (2026). Temperature-Dependent Thermal Properties of Nearly Amorphous Polyamide 6. Polymers, 18(8), 981. https://doi.org/10.3390/polym18080981

Vancouver

Klingenbeck J, Lion A, Johlitz M. Temperature-Dependent Thermal Properties of Nearly Amorphous Polyamide 6. Polymers. 2026;18(8):981. doi:10.3390/polym18080981

BibTeX
@article{Klingenbeck2026,
  author = {Klingenbeck, Julian and Lion, Alexander and Johlitz, Michael},
  title = {Temperature-Dependent Thermal Properties of Nearly Amorphous Polyamide 6},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {8},
  pages = {981},
  doi = {10.3390/polym18080981}
}
Kostenlos starten →