EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental and Finite Element Investigation of Bolted Connections in GFRP Composite Cross-Arms for Energy Distribution Towers

Burak Talha Kılıç iD, Eray Baran

Polymers · 17.04.2026 · 18 (8) · 978

DOI: 10.3390/polym18080978 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 17.04.2026. Verfasst von Burak Talha Kılıç und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, Middle East Technical University, 06800 Ankara, Türkiye. Die Arbeit nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Scientific Research Project Coordination Unit (BAP) in Middle East Technical University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates bolted connections in open-section glass fiber-reinforced polymer (GFRP) composite cross-arms for 34.5 kV energy distribution towers. Six GFRP angle sections (L50 × 5 to L120 × 12) were tested under tensile loading using a constant edge distance-to-bolt diameter ratio (e/d = 5), and the connection performance was evaluated based on general maximum and deformation-based criteria (4% and 1 mm hole elongation). Connection capacities ranged from 14.65 to 36.68 kN for single-bolt configurations. Results from multi-bolt connections tests indicated strong influence of bolt layout on connection performance. The highest load capacities of 46.45 kN and 45.93 kN were obtained, respectively, with the two-row bolt configuration and staggered configuration. Comparison of the measured load capacities with ASCE/SEI 74-23 predictions revealed significant discrepancies depending on the assumed failure mode of the connection. A simplified finite element model was developed to predict load–displacement response, capturing initial stiffness and overall trends with reasonable agreement, particularly for connections exhibiting similar failure modes. The findings provide a reliable basis for selecting appropriate bolted connection details in open-section GFRP cross-arm systems.

Schlagwörter

Stichwörter der Autor:innen

bolted connectionscomposite cross-armenergy distribution towerfinite element modelingglass fiber-reinforced polymer

Autor:innen und Institutionen

  • Department of Civil Engineering, Middle East Technical University, 06800 Ankara, Türkiye.

ORCID-Profile: Burak Talha Kılıç

Förderung

  • Scientific Research Project Coordination Unit (BAP) in Middle East Technical University

Zitieren

APA

Kılıç, B. T., & Baran, E. (2026). Experimental and Finite Element Investigation of Bolted Connections in GFRP Composite Cross-Arms for Energy Distribution Towers. Polymers, 18(8), 978. https://doi.org/10.3390/polym18080978

Vancouver

Kılıç BT, Baran E. Experimental and Finite Element Investigation of Bolted Connections in GFRP Composite Cross-Arms for Energy Distribution Towers. Polymers. 2026;18(8):978. doi:10.3390/polym18080978

BibTeX
@article{Kl2026,
  author = {Kılıç, Burak Talha and Baran, Eray},
  title = {Experimental and Finite Element Investigation of Bolted Connections in GFRP Composite Cross-Arms for Energy Distribution Towers},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {8},
  pages = {978},
  doi = {10.3390/polym18080978}
}
Kostenlos starten →