EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Enhancing Stability of Reprocessed Acrylonitrile–Butadiene–Styrene (ABS) Polymers from Sorted WEEE Streams for Filament Extrusion

Christina Podara iD, Christos Panagiotopoulos iD, Dionysia Kouranou iD, Christos Tsirogiannis iD, Melpo Karamitrou iD, Tatjana Kosanovic Milickovic, Stamatina Vouyiouka iD, Costas Charitidis iD

Polymers · 16.04.2026 · 18 (8) · 971

DOI: 10.3390/polym18080971 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 16.04.2026. Verfasst von Christina Podara und 7 weiteren Autor:innen. Beteiligte Einrichtung: Research Lab of Advanced, Composite, Nano Materials & Nanotechnology (R-NanoLab), School of Chemical Engineering, National Technical University of At…. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 55 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: European Union.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical recycling of styrenic polymers from waste electrical and electronic equipment (WEEE) is often limited by thermomechanical degradation occurring during repeated processing. In this work, the degradation behaviour of acrylonitrile–butadiene–styrene (ABS) recovered from sorted WEEE streams was systematically investigated through multiple extrusion cycles, and the effectiveness of antioxidant stabilization was evaluated. Progressive degradation was assessed by chemical structure, rheological, thermal and mechanical testing, and colorimetric analysis. Repeated processing resulted in increased melt flow, altered viscoelastic behaviour, molecular weight reduction, deterioration of mechanical properties, and discoloration. To mitigate these effects, antioxidant-stabilized compounds were prepared and subjected to identical reprocessing pathways. The addition of antioxidants effectively reduced chain scission, stabilized rheological properties, and limited colour changes during reprocessing. Furthermore, the processability of the optimized recycled ABS is demonstrated through filament extrusion for fused filament fabrication, highlighting its potential for high-value additive manufacturing applications. These results demonstrate that appropriate stabilization strategies can significantly enhance the process stability and recyclability of styrenic polymers from WEEE streams, supporting their use in higher-value applications within a circular economy framework.

Schlagwörter

Stichwörter der Autor:innen

WEEE plasticsantioxidant stabilizationfilament extrusionmechanical recyclingstyrenic polymers

Autor:innen und Institutionen

  • Research Lab of Advanced, Composite, Nano Materials & Nanotechnology (R-NanoLab), School of Chemical Engineering, National Technical University of Athens, 9 Heroon, Polytechniou St., Zografos, 157 80 Athens, Greece.
  • Laboratory of Polymer Technology, School of Chemical Engineering, National Technical University of Athens, 9 Heroon, Polytechniou St., Zografos, 157 80 Athens, Greece.

ORCID-Profile: Christina Podara, Christos Panagiotopoulos, Dionysia Kouranou, Christos Tsirogiannis, Melpo Karamitrou, Stamatina Vouyiouka, Costas Charitidis

Förderung

  • European Union

Zitieren

APA

Podara, C., Panagiotopoulos, C., Kouranou, D., Tsirogiannis, C., Karamitrou, M., Kosanovic Milickovic, T., Vouyiouka, S., & Charitidis, C. (2026). Enhancing Stability of Reprocessed Acrylonitrile–Butadiene–Styrene (ABS) Polymers from Sorted WEEE Streams for Filament Extrusion. Polymers, 18(8), 971. https://doi.org/10.3390/polym18080971

Vancouver

Podara C, Panagiotopoulos C, Kouranou D, Tsirogiannis C, Karamitrou M, Kosanovic Milickovic T, et al. Enhancing Stability of Reprocessed Acrylonitrile–Butadiene–Styrene (ABS) Polymers from Sorted WEEE Streams for Filament Extrusion. Polymers. 2026;18(8):971. doi:10.3390/polym18080971

BibTeX
@article{Podara2026,
  author = {Podara, Christina and Panagiotopoulos, Christos and Kouranou, Dionysia and Tsirogiannis, Christos and Karamitrou, Melpo and Kosanovic Milickovic, Tatjana and Vouyiouka, Stamatina and Charitidis, Costas},
  title = {Enhancing Stability of Reprocessed Acrylonitrile–Butadiene–Styrene (ABS) Polymers from Sorted WEEE Streams for Filament Extrusion},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {8},
  pages = {971},
  doi = {10.3390/polym18080971}
}
Kostenlos starten →