Cure Modelling and Monitoring for Isothermal Processing of Fast-Curing Epoxy Resin
Polymers · 14.04.2026 · 18 (8) · 952
DOI: 10.3390/polym18080952 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 14.04.2026. Verfasst von Patrick Schaible und 3 weiteren Autor:innen. Beteiligte Einrichtung: wbk Institute of Production Science, Karlsruhe Institute of Technology (KIT), Kaiserstr. 12, 76131 Karlsruhe, Germany. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 13 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Federal Ministry for Economic Affairs and Climate Action (BMWK).
Abstract (Originalsprache)
In liquid composite moulding processes, the curing behaviour of thermoset matrices plays a decisive role in determining manufacturing quality and cycle time. Premature demoulding may lead to insufficiently cured components, whereas excessively long curing times reduce production efficiency. Reliable monitoring and modelling of the curing process are therefore essential for process optimisation. In this study, the cure kinetics of a fast-curing epoxy resin system are modelled using the Grindling kinetic model, which accounts for diffusion-controlled reaction behaviour and vitrification effects. Model parameters are identified using both dynamic and isothermal differential scanning calorimetry (DSC) measurements. In addition, the glass transition temperature is described as a function of the degree of cure using the DiBenedetto relationship. To demonstrate the applicability of the model for process monitoring, an experimental mould equipped with temperature sensors was developed to simulate real-time estimation of the degree of cure during isothermal processing. The predicted degree of cure is validated by post-process DSC analysis of the manufactured samples. Initial comparisons reveal systematic deviations caused by temperature measurement uncertainties. After implementing a temperature correction based on experimentally determined sensor deviations, the predicted degree of cure shows significantly improved agreement with DSC measurements. The results demonstrate that combining kinetic modelling with temperature monitoring enables reliable real-time estimation of the curing state for fast-curing epoxy systems. The study also highlights the critical importance of accurate temperature measurement for curing monitoring and provides insights into the practical implementation of sensor-based monitoring strategies in liquid composite moulding processes.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- wbk Institute of Production Science, Karlsruhe Institute of Technology (KIT), Kaiserstr. 12, 76131 Karlsruhe, Germany.
ORCID-Profile: Sebastian Schabel, Jürgen Fleischer
Förderung
- Federal Ministry for Economic Affairs and Climate Action (BMWK)
Zitieren
APA
Schaible, P., Schwaiberger, D., Schabel, S., & Fleischer, J. (2026). Cure Modelling and Monitoring for Isothermal Processing of Fast-Curing Epoxy Resin. Polymers, 18(8), 952. https://doi.org/10.3390/polym18080952
Vancouver
Schaible P, Schwaiberger D, Schabel S, Fleischer J. Cure Modelling and Monitoring for Isothermal Processing of Fast-Curing Epoxy Resin. Polymers. 2026;18(8):952. doi:10.3390/polym18080952
BibTeX
@article{Schaible2026,
author = {Schaible, Patrick and Schwaiberger, David and Schabel, Sebastian and Fleischer, Jürgen},
title = {Cure Modelling and Monitoring for Isothermal Processing of Fast-Curing Epoxy Resin},
journal = {Polymers},
year = {2026},
volume = {18},
number = {8},
pages = {952},
doi = {10.3390/polym18080952}
}
EUVIMED