EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

High-Performance PA6 Composites Reinforced with Recycled Aramid Fibers from Firefighter Protective Clothing

Joaquín Marco-Sanjuan iD, Carlos Lazaro-Herdez iD, Mario Miranda-Pinzon, Octavio Fenollar iD

Polymers · 10.04.2026 · 18 (8) · 931

DOI: 10.3390/polym18080931 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.04.2026. Verfasst von Joaquín Marco-Sanjuan und 3 weiteren Autor:innen. Beteiligte Einrichtung: University Research Institute of Materials Technology (ITM), Universitat Politècnica de València (UPV), Plaza Ferrándiz y Carbonell 1, 03801 Alcoy, S…. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Spanish Ministry of Science and Innovation, European Union NextGenerationEU/PRTR, Conselleria de Innovación, Industria, Comercio y Turismo of the Generalitat Valenciana through IVACE.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The recycling of technical textile waste represents a major challenge due to the complex and multilayered structure of these materials. Firefighter protective clothing, mainly composed of high-performance aramid fibers combined with polymeric membranes and auxiliary textile components, is commonly landfilled or incinerated at the end of its service life, resulting in a significant environmental impact. This work utilized recycled aramid-rich textile waste obtained from end-of-life firefighter protective clothing as reinforcement for polyamide 6 to develop high-performance thermoplastic composites within a circular economy framework. Composites containing 15, 30, 45, and 60 wt.% of recycled textile waste were manufactured by melt compounding followed by injection molding. In addition, a selected formulation containing 30 wt.% reinforcement was compatibilized using an amino-functional silane to improve interfacial adhesion. The materials were systematically characterized in terms of tensile properties, thermal behavior, thermomechanical performance, water uptake, flammability, colorimetric properties, and fracture morphology by field emission scanning electron microscopy. The results revealed a pronounced increase in stiffness and thermomechanical stability, with tensile strength increasing from approximately 65 MPa for neat PA6 up to 78 MPa at 30 wt.% reinforcement, and elastic modulus exceeding 5000 MPa at high reinforcement contents. An optimal balance between mechanical performance and ductility was achieved at 30 wt.% reinforcement, while higher contents enabled a substantial extension of the service temperature range, with HDT values increasing from 55 °C for neat PA6 up to 173 °C for highly reinforced systems. FESEM analysis confirmed improved interfacial adhesion in silane-compatibilized systems, explaining the enhanced mechanical and thermomechanical behavior. Furthermore, the incorporation of recycled aramid-rich textile waste led to a significant improvement in flame retardancy, enabling UL-94 V-0 classification at 30 wt.% reinforcement and above, without the use of additional flame-retardant additives, enabling UL-94 V-0 classification without additional flame-retardant additives. Overall, this study demonstrates the technical feasibility and high added-value potential of valorizing firefighter protective clothing waste into advanced PA6-based composites with enhanced mechanical, thermal, and fire-resistant properties, providing a sustainable route for the valorization of high-performance textile waste.

Schlagwörter

Stichwörter der Autor:innen

flame retardancypolyamide 6 compositesrecycled aramid fiberstextile waste valorizationthermomechanical properties

Autor:innen und Institutionen

  • University Research Institute of Materials Technology (ITM), Universitat Politècnica de València (UPV), Plaza Ferrándiz y Carbonell 1, 03801 Alcoy, Spain.

ORCID-Profile: Joaquín Marco-Sanjuan, Carlos Lazaro-Herdez, Octavio Fenollar

Förderung

  • Spanish Ministry of Science and Innovation
  • European Union NextGenerationEU/PRTR
  • Conselleria de Innovación, Industria, Comercio y Turismo of the Generalitat Valenciana through IVACE

Zitieren

APA

Marco-Sanjuan, J., Lazaro-Herdez, C., Miranda-Pinzon, M., & Fenollar, O. (2026). High-Performance PA6 Composites Reinforced with Recycled Aramid Fibers from Firefighter Protective Clothing. Polymers, 18(8), 931. https://doi.org/10.3390/polym18080931

Vancouver

Marco-Sanjuan J, Lazaro-Herdez C, Miranda-Pinzon M, Fenollar O. High-Performance PA6 Composites Reinforced with Recycled Aramid Fibers from Firefighter Protective Clothing. Polymers. 2026;18(8):931. doi:10.3390/polym18080931

BibTeX
@article{MarcoSanjuan2026,
  author = {Marco-Sanjuan, Joaquín and Lazaro-Herdez, Carlos and Miranda-Pinzon, Mario and Fenollar, Octavio},
  title = {High-Performance PA6 Composites Reinforced with Recycled Aramid Fibers from Firefighter Protective Clothing},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {8},
  pages = {931},
  doi = {10.3390/polym18080931}
}
Kostenlos starten →