EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Assessment of Flexible Pavement Containing Rubberized Asphalt

Noorance Al-Mukaram iD, Tariq Al-Mansoori, Ali M Lafta iD, Karzan Ismael iD, Pooyan Ayar iD

Polymers · 10.04.2026 · 18 (8) · 927

DOI: 10.3390/polym18080927 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 10.04.2026. Verfasst von Noorance Al-Mukaram und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Civil Engineering, College of Engineering, Al-Muthanna University, Samawah 66001, Iraq. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This work deals with a practical method of using crumb rubber resulting from waste tires to produce modified bitumen via a wet mixing method for road construction in Iraq. Due to wide variation in temperatures and over-loading traffic in Iraq, rutting deformation is the most observed structural pavement problem. Also, tire wear and tear are higher in Iraq than in other countries due to high temperature and dry weather most of the year, which makes considerable amounts of waste tire piles easily accessible. Utilizing this waste material could be crucial to the environment and economy of the country, as well as to the sustainability of resources. Using waste tire materials as bitumen modifiers in the production of hot mix asphalt is a widely practiced experiment, although it is applied differently depending on the weather, type of bitumen used, and its availability. In the methodology of this research, it is suggested to modify asphalt grades 60/70 by a certain amount of crumb rubber (5–20%). The modified asphalt and asphalt grade 40/50 were used in preparing two types of asphalt concretes to examine their volumetric properties and evaluate their rutting behavior. The results for both mixtures were compared to the Iraqi General Specifications for Roads and Bridges (SORB/R9). The findings showed significant improvements in Marshall stability and flow, as well as in the percentages of voids satisfied in the modified mixture. After using rubberized asphalt in the mixture, the rutting depth was recorded below 20 mm and decreased by 30% and 26% at temperatures of 40 °C and 60 °C, respectively, compared to the controlled mixture.

Schlagwörter

Stichwörter der Autor:innen

Marshall testsmodified asphaltrubberized asphaltrutting testwaste tires

Autor:innen und Institutionen

  • Department of Civil Engineering, College of Engineering, Al-Muthanna University, Samawah 66001, Iraq.
  • Department of City Planning Engineering, Technical College of Engineering, Sulaimani Polytechnic University, Sulaymaniyah 46001, Iraq.
  • School of Civil Engineering, Iran University of Science and Technology (IUST), Tehran 16846-13114, Iran.

ORCID-Profile: Noorance Al-Mukaram, Ali M Lafta, Karzan Ismael, Pooyan Ayar

Zitieren

APA

Al-Mukaram, N., Al-Mansoori, T., Lafta, A. M., Ismael, K., & Ayar, P. (2026). Assessment of Flexible Pavement Containing Rubberized Asphalt. Polymers, 18(8), 927. https://doi.org/10.3390/polym18080927

Vancouver

Al-Mukaram N, Al-Mansoori T, Lafta AM, Ismael K, Ayar P. Assessment of Flexible Pavement Containing Rubberized Asphalt. Polymers. 2026;18(8):927. doi:10.3390/polym18080927

BibTeX
@article{AlMukaram2026,
  author = {Al-Mukaram, Noorance and Al-Mansoori, Tariq and Lafta, Ali M and Ismael, Karzan and Ayar, Pooyan},
  title = {Assessment of Flexible Pavement Containing Rubberized Asphalt},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {8},
  pages = {927},
  doi = {10.3390/polym18080927}
}
Kostenlos starten →