Strength and Degradation Characteristics of Zein Biopolymer-Treated Sands Under Wetting–Drying Cycles
Polymers · 05.04.2026 · 18 (7) · 888
DOI: 10.3390/polym18070888 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 05.04.2026. Verfasst von Quadri Olakunle Babatunde und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Agricultural Civil Engineering, Kyungpook National University, 80 Daehak-Ro, Buk-Gu, Daegu 41566, Republic of Korea. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 54 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Research Foundation of Korea (NRF).
Abstract (Originalsprache)
Repeated wetting–drying cycles accelerate scouring and deteriorate soil structure by increasing pore-water pressure. This study examines the durability of sand treated with zein biopolymers subjected to wetting–drying cycles and compares its uncycled condition with that of xanthan gum (XG). The treated specimens are prepared with biopolymer contents of 1% and 3% by mass of sand. The specimens are cured for an initial period of 7 days under atmospheric conditions, whereafter they are subjected to a series of wetting–drying cycles. Subsequently, the dimensions and mass of the specimens are measured to evaluate bulk density-related changes during the cycles. The strength and degradation characteristics of the specimens are evaluated through unconfined compression tests after being subjected to different numbers of cycles. The bulk unit weight after the drying phase remains nearly constant, whereas that after the wetting phase increases with both the number of cycles and biopolymer content. Overall, specimens with higher biopolymer content exhibit lower bulk unit weights. The XG-treated specimens show earlier strength improvement than the zein-treated specimens due to the faster curing-related strength development associated with water-based gelation. Moreover, the XG-treated sand rapidly fails after the first wetting phase, while the compressive strength of the cycled zein-treated specimens is lower than that of the uncycled specimens. Zein-treated sand with 3% biopolymer content shows a higher durability index after 10 cycles than sand treated with 1% biopolymer content. Therefore, a higher zein content can be used to enhance the durability of sand subject to frequent wetting and drying cycles.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Department of Agricultural Civil Engineering, Kyungpook National University, 80 Daehak-Ro, Buk-Gu, Daegu 41566, Republic of Korea.
ORCID-Profile: Quadri Olakunle Babatunde, Yong-Hoon Byun
Förderung
- National Research Foundation of Korea (NRF)
Zitieren
APA
Babatunde, Q. O., Yeo, W., & Byun, Y. H. (2026). Strength and Degradation Characteristics of Zein Biopolymer-Treated Sands Under Wetting–Drying Cycles. Polymers, 18(7), 888. https://doi.org/10.3390/polym18070888
Vancouver
Babatunde QO, Yeo W, Byun YH. Strength and Degradation Characteristics of Zein Biopolymer-Treated Sands Under Wetting–Drying Cycles. Polymers. 2026;18(7):888. doi:10.3390/polym18070888
BibTeX
@article{Babatunde2026,
author = {Babatunde, Quadri Olakunle and Yeo, Woonjae and Byun, Yong-Hoon},
title = {Strength and Degradation Characteristics of Zein Biopolymer-Treated Sands Under Wetting–Drying Cycles},
journal = {Polymers},
year = {2026},
volume = {18},
number = {7},
pages = {888},
doi = {10.3390/polym18070888}
}
EUVIMED