Single-Step Phytate Flame-Retardant Coatings for Cotton, Polyester and Cotton/Polyester Blends
Polymers · 27.03.2026 · 18 (7) · 819
DOI: 10.3390/polym18070819 ↗Kurz gefasst
Fachartikel in der Zeitschrift Polymers, online erschienen am 27.03.2026. Verfasst von Olga Zilke und 9 weiteren Autor:innen. Beteiligte Einrichtung: Deutsches Textilforschungszentrum Nord-West gGmbH, Adlerstr. 1, D-47798 Krefeld, Germany. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 61 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Industrielle Gemeinschaftsforschung, Arbeitsgemeinschaft industrieller Forschungsvereinigungen e.V., Bundesministerium fuer Wirtschaft und Klimaschutz.
Abstract (Originalsprache)
Scalable halogen-free flame-retardant textile finishes remain challenging, particularly regarding laundering durability and industrially viable processing. Here, two phytate flame retardants, poly(vinylammonium) phytate (PVAmPA, partly bio-based) and chitosan phytate (ChiPA, fully bio-based), were applied to cotton (CO), polyester (PET), and a CO/PET blend by a single-step, binder-assisted coating. Both coatings suppressed surface flaming in ISO 15025 on all substrates. Although laundering at 40 °C caused systematically higher wash-off for ChiPA, surface flame suppression was retained for most coated fabrics, with the exception of ChiPA on CO and PVAmPA on PET. Thermogravimetric analysis showed earlier decomposition and increased residue formation for both systems, with the residue at 700 °C increasing from 4.5% to 18.2% for CO_PVAmPA and from 4.5% to 15.2% for CO_ChiPA. In microscale combustion calorimetry, PVAmPA reduced the heat release capacity (HRC) from 251 to 168 J/(g·K) for CO/PET, whereas ChiPA showed its strongest effect on PET, reducing HRC from 413 to 222 J/(g·K). Gas-phase analyses indicated enhanced water release for both coatings and additional NH3 evolution for PVAmPA. Overall, binder-assisted, single-step phytate coatings provide a scalable route to halogen-free flame retardancy, with PVAmPA showing the most robust overall durability and ChiPA offering a fully bio-based alternative with strong substrate-dependent performance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Deutsches Textilforschungszentrum Nord-West gGmbH, Adlerstr. 1, D-47798 Krefeld, Germany.
- Fraunhofer-Institut fuer Umwelt-, Sicherheits- und Energietechnik UMSICHT, Osterfelder Str. 3, D-46047 Oberhausen, Germany.
- Physical Chemistry & CENIDE, University Duisburg-Essen, Universitaetsstr. 2, D-45117 Essen, Germany.
ORCID-Profile: Olga Zilke, Mariia Kuznetsova, Karlheinz Bretz, Jochen S Gutmann, Klaus Opwis
Förderung
- Industrielle Gemeinschaftsforschung
- Arbeitsgemeinschaft industrieller Forschungsvereinigungen e.V.
- Bundesministerium fuer Wirtschaft und Klimaschutz
Zitieren
APA
Zilke, O., Plohl, D., Ploenißen, M., Salma, A., Danielsiek, D., Kuznetsova, M., Bretz, K., Moerbitz, P., Gutmann, J. S., & Opwis, K. (2026). Single-Step Phytate Flame-Retardant Coatings for Cotton, Polyester and Cotton/Polyester Blends. Polymers, 18(7), 819. https://doi.org/10.3390/polym18070819
Vancouver
Zilke O, Plohl D, Ploenißen M, Salma A, Danielsiek D, Kuznetsova M, et al. Single-Step Phytate Flame-Retardant Coatings for Cotton, Polyester and Cotton/Polyester Blends. Polymers. 2026;18(7):819. doi:10.3390/polym18070819
BibTeX
@article{Zilke2026,
author = {Zilke, Olga and Plohl, Dennis and Ploenißen, Martin and Salma, Alaa and Danielsiek, Dominic and Kuznetsova, Mariia and Bretz, Karlheinz and Moerbitz, Philip and Gutmann, Jochen S and Opwis, Klaus},
title = {Single-Step Phytate Flame-Retardant Coatings for Cotton, Polyester and Cotton/Polyester Blends},
journal = {Polymers},
year = {2026},
volume = {18},
number = {7},
pages = {819},
doi = {10.3390/polym18070819}
}
EUVIMED